Bamboo Veneer Caramel 250x43cm

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


Bamboo veneer Bamboo Bambu Bambou caramel V 250x43cm

Item description

 

These veneer sheets are only offered in raw cut form and, as already mentioned, are laminated with a fleece on the back. Easier processing, increased flexibility and reduced risk of breakage are just three of the advantages! Raw cutting/raw material This means that the sides/edges are not yet 100% precisely cut.  The veneer with fleece is simply processed like any other veneer (glued, ironed on, pressed, See processing tips below) and the fleece comes & stays on the bottom or back and is processed. The bamboo veneer sheet is delivered without glue.


These bamboo veneer sheets serve only as raw material/starting material for many different applications such as for DIY projects, hobbyists, jewelry, inlays, artists, furniture parts, and all kinds of craftsmen, designers or creative hands and still have to be processed and processed yourself! In general, you should always plan enough waste into your project and should never count on the maximum width and length specified here! The edges/sides could still be a little frayed from time to time, or there might be a fine hairline crack at the end every now and then. The dimensions are given with minimum and maximum values. The photos were taken from 2 bamboo leaves with a width of 43cm!


If you process this veneer, you will help to relieve the pressure on tropical trees and thus protect them - that is, if you decide against exotic veneer wood! By purchasing bamboo products you can do your own personal part! 

Advantages of these veneers:
- Relief for already endangered tropical tree species
- Consistent, very similar appearance always available in large quantities
- Back laminated/reinforced with fleece (easier to handle, cut, edit - is much more stable)
- very sustainable and environmentally friendly
- very fast-growing and rapidly regrowing
- large areas (instead of narrow strips) up to 64cm wide

- easier processing (no annoying joining)
- Time and cost savings in processing
- natural wooden surfaces
- Solid wood: now also available as solid boards!  


Processing instructions:


 
Cutting veneers:
-All veneers are only rough cut = not precisely cut
 Please keep in mind that a sheet of veneer is not perfectly cut or does not always have perfectly straight edges. Veneers only serve as a starting material/raw material for countless creative works and wood projects and you should always take sufficient waste into account. For example, if a sheet is 30cm wide, you should allow for at least 0.5-1cm of overhang on each side.
-You can easily cut these veneers with a sharp cutter/scalpel/veneer knife 
  or cut carefully with scissors (smaller pieces).

Processing veneers with fleece: 
-For veneers with fleece, the side with the fleece goes on the underside and remains on the veneer and is glued and pressed! All veneers are delivered without glue on the back! All of our bamboo Veneers can be processed with fleece like any other veneer.

-Carrier surface:
   You can actually apply all veneers to any substrate using the necessary adhesives!
  e.g. all kinds of boards such as MDF, chipboard,..., solid wood, boards, plastic, metal, glass, etc.) each with the necessary adhesives. 
- Adhesive/glue for wood veneers:
Any adhesive can be used: wood glue/white glue, Pattex, epoxy, bone glue, 2-component adhesives, etc. With wood glue/Ponal, for example, you can either press the veneer overnight with a plate and weight or screw clamps, or iron it on. 

With Pattex (is a contact adhesive) you can apply the veneer relatively quickly Apply pressure (e.g. with a rolling pin) - this will hold securely after just a short time!

- iron-on veneers - veneer with hot melt adhesive:
  you can easily make your own by simply Apply glue to the veneer and the support surface - let it dry for about 15-20 minutes (the glue will be nice and glassy) and then press the veneer on with the iron under pressure.
 
-Surface treatment of veneers: 
Depending on your taste, there are many possible/usual options on the market that you can use:
 Clear varnish (glossy, matt), oil, wax. Tip: to preserve the colors for longer, an oil/varnish with UV protection is recommended - but of course it doesn't have to be.
If you need further practical tips about veneer processing, click here
we present our veneer specialist book \"Veneers & Inlays\" to you (--> also available in the shop). We partly helped design this book and is very useful and helpful for both beginners and experts/carpenters/carpenters/artists!       

 
Shipment:              

All veneers are easily moldable and will be shipped rolled in a small box. 

  

incl. VAT
Buy Now Watch article Ask a Question

Bamboo veneer Bamboo Bambu Bambou caramel V 250x43cm

 

These veneer sheets are only offered in raw cut form and, as already mentioned, are laminated with a fleece on the back. Easier processing, increased flexibility and reduced risk of breakage are just three of the advantages! Raw cutting/raw material This means that the sides/edges are not yet 100% precisely cut.  The veneer with fleece is simply processed like any other veneer (glued, ironed on, pressed, See processing tips below) and the fleece comes & stays on the bottom or back and is processed. The bamboo veneer sheet is delivered without glue.


These bamboo veneer sheets serve only as raw material/starting material for many different applications such as for DIY projects, hobbyists, jewelry, inlays, artists, furniture parts, and all kinds of craftsmen, designers or creative hands and still have to be processed and processed yourself! In general, you should always plan enough waste into your project and should never count on the maximum width and length specified here! The edges/sides could still be a little frayed from time to time, or there might be a fine hairline crack at the end every now and then. The dimensions are given with minimum and maximum values. The photos were taken from 2 bamboo leaves with a width of 43cm!


If you process this veneer, you will help to relieve the pressure on tropical trees and thus protect them - that is, if you decide against exotic veneer wood! By purchasing bamboo products you can do your own personal part! 

Advantages of these veneers:
- Relief for already endangered tropical tree species
- Consistent, very similar appearance always available in large quantities
- Back laminated/reinforced with fleece (easier to handle, cut, edit - is much more stable)
- very sustainable and environmentally friendly
- very fast-growing and rapidly regrowing
- large areas (instead of narrow strips) up to 64cm wide

- easier processing (no annoying joining)
- Time and cost savings in processing
- natural wooden surfaces
- Solid wood: now also available as solid boards!  


Processing instructions:


 
Cutting veneers:
-All veneers are only rough cut = not precisely cut
 Please keep in mind that a sheet of veneer is not perfectly cut or does not always have perfectly straight edges. Veneers only serve as a starting material/raw material for countless creative works and wood projects and you should always take sufficient waste into account. For example, if a sheet is 30cm wide, you should allow for at least 0.5-1cm of overhang on each side.
-You can easily cut these veneers with a sharp cutter/scalpel/veneer knife 
  or cut carefully with scissors (smaller pieces).

Processing veneers with fleece: 
-For veneers with fleece, the side with the fleece goes on the underside and remains on the veneer and is glued and pressed! All veneers are delivered without glue on the back! All of our bamboo Veneers can be processed with fleece like any other veneer.

-Carrier surface:
   You can actually apply all veneers to any substrate using the necessary adhesives!
  e.g. all kinds of boards such as MDF, chipboard,..., solid wood, boards, plastic, metal, glass, etc.) each with the necessary adhesives. 
- Adhesive/glue for wood veneers:
Any adhesive can be used: wood glue/white glue, Pattex, epoxy, bone glue, 2-component adhesives, etc. With wood glue/Ponal, for example, you can either press the veneer overnight with a plate and weight or screw clamps, or iron it on. 

With Pattex (is a contact adhesive) you can apply the veneer relatively quickly Apply pressure (e.g. with a rolling pin) - this will hold securely after just a short time!

- iron-on veneers - veneer with hot melt adhesive:
  you can easily make your own by simply Apply glue to the veneer and the support surface - let it dry for about 15-20 minutes (the glue will be nice and glassy) and then press the veneer on with the iron under pressure.
 
-Surface treatment of veneers: 
Depending on your taste, there are many possible/usual options on the market that you can use:
 Clear varnish (glossy, matt), oil, wax. Tip: to preserve the colors for longer, an oil/varnish with UV protection is recommended - but of course it doesn't have to be.
If you need further practical tips about veneer processing, click here
we present our veneer specialist book \"Veneers & Inlays\" to you (--> also available in the shop). We partly helped design this book and is very useful and helpful for both beginners and experts/carpenters/carpenters/artists!       

 
Shipment:              

All veneers are easily moldable and will be shipped rolled in a small box. 

  

Receive offers conveniently via email
Subscribe to Newsletter
Left
payment

Paypal
Transfer
Credit card
Cash payment

Shipment

    • contact

    Do you have any questions about our offers? Contact us using the eBay contact form.

    eBay message
    These bamboo veneer sheets serve only as raw material/starting material for many different applications such as for DIY projects, hobbyists, jewelry, inlays, artists, furniture parts, and all kinds of craftsmen, designers or creative hands and still have to be processed and processed yourself! In general, you should always plan enough waste into your project and should never count on the maximum width and length specified here! The edges/sides could still be a little frayed from time to time, or there might be a fine hairline crack at the end every now and then. The dimensions are given with minimum and maximum values. The photos were taken from 2 bamboo leaves with a width of 43cm! These bamboo veneer sheets serve only as raw material/starting material for many different applications such
    Related keywords
    bamboo blinds
    bamboo blind
    bamboo fence
    bamboo worktop
    bamboo wood sheet
    bamboo shade
    bamboo kitchen worktop
    bamboo fence roll
    bamboo window blinds
    bamboo veneer
    caramel 250x43cm
    cordless bamboo shades
    bamboo roman shade
    bamboo window shades
    bamboo veneer 250x43cm
    bamboo veneer caramel
    bamboo veneer caramel 250x43cm
    Provided by