Color Temperature: 6000K White
Wattage: 200W/Kit(100W/Bulb)
Voltage: DC 12V to 24V
Lumens: 16000LM/Kit;8000LM/Bulb
Features:
-No delay to light up, Faster on/off response time
-Lifespan: 30,000 working hours ,Adopt imported chips, stable quality, long service life
-Aluminum heat sink design,built-in automotive circuit to prevent electronic interference.
-The model is as the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required
-Energy saving, environmental protection, Stable performance, through strict test
-The LED Fog light is 40% Brighter,Broader than Original Halogen.
Install Caution
As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
Put the vehicle into park or make sure it is securely in gear.
Make sure to have the ignition turned off and the keys removed.
Be careful to avoid burns, especially when turning on or off the vehicles lighting.
Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Package Content
2x 9005/HB3 Headlight bulbs
New and old packaging will be shipped randomly!
Question: One of the two bulbs broke, how can I know it is high beam or low beam?
Answer: There are 2 main structure of high beam and low beam. You can confirm as following steps:
1. check the high & low beam structure by the picture.
2. check the fitment system, confirm whether the bulb fits your car.
Or you can directly contact our support team for help.
Question: Light flickers, dashboard has error code, other lights go wrong, high beam and low beam can not switched, lights off. What is the reason of the above problems and how to fix?
Answer: Such problems occurred due to some models' canbus systems are not compatible with the led lights. A canbus decoder can solve these problems. Contact our support team if you meet any problems above, we will send the decoder as soon as possible.
Question: What I have is aftermarket assembly, can I follow the Fitment system to select lights?
Answer: Sorry no. Our Fitment system can only make sure the matching with original assembly. Aftermarket assembly may be different with the original one.
Question: The light can not fixed at 3 and 9 o'clock, does it affect the function?
Answer: Most models can be fixed towards 3 and 9 o'clock except very few model. The position only affect beam pattern. If the beam pattern is satisfying, it won't affect any other function even it isn't towards 3 and 9 o'clock.
Question: My 9005 high beam also work as DRL. If I install your 9005 high beam, will my DRL work well? If no, is there any solution?
Answer: The working principles is different between LED lamps and halogen lamps. If DRL and high beam are integrated, high beam mode can be used, but DRL mode for some models may not work normally. (Eg: 2007-2017 Camry; 2011-2020 Sienna; 2006-2015 RAV4)
All LED lights supplier can't avoid this issue. Order carefully if the DRL mode is necessary for you.
On Dec 29, 2025 at 23:37:09 PST, seller added the following information: