remote controls
DESCRIPTION
TWO-CHANNEL SELF-LEARNING RX402 433.92 MHZ RADIO RECEIVER COMPATIBLE WITH DITEC and NOVOTECNICA REMOTE CONTROLS.
The ideal product to replace your faulty receiver or to control other equipment with the free buttons on your remote control, turn on lights or other.
Easy to install and small in size, it is universal thanks to the 12 or 24V DC-AC power supply, it can be connected to any control unit and replace the existing receiver or operate in parallel with it.
The container has IP44 degree of protection, it can be used outdoors, but we recommend the use of a watertight container. It comes with a piece of wire as an antenna, generally more than enough to guarantee a good range. If necessary, an external antenna can be connected.
The memorisation of the remote controls is self-learning using the internal keys, just press once the key corresponding to the desired channel and immediately after the key of the remote control to be memorised.
Power supply : 12-24V DC-AC
Relay capacity: 3A 250Vac-30Vdc
Dimensions: WxHxD mm. 60x94x28
Range: 50-80mt in free field
Memory : 400 different remote controls
Technical notes
The receiver is compatible with DITEC and Novotecnica 433 Mhz remote controls, both fixed code and rolling code: Ditec GOL4 - GOL4C - BIX LP2 - BIX LS2 - BIX AG4 - Novotecnica BIX L2.
Be careful not to confuse with similar models, but of different frequencies, if you don't know the exact model, contact us or send us an image to be sure.
The receiver memory can contain up to a maximum of 400 different codes.
It is also compatible with models of other brands, by clicking on the photo alongside you can see a list of the main compatible remote controls, if in doubt contact us.
The ideal product to replace your faulty receiver or to control other equipment with the free buttons on your remote control, turn on lights or other.
Easy to install and small in size, it is universal thanks to the 12 or 24V DC-AC power supply, it can be connected to any control unit and replace the existing receiver or operate in parallel with it.
The container has IP44 degree of protection, it can be used outdoors, but we recommend the use of a watertight container. It comes with a piece of wire as an antenna, generally more than enough to guarantee a good range. If necessary, an external antenna can be connected.
The memorisation of the remote controls is self-learning using the internal keys, just press once the key corresponding to the desired channel and immediately after the key of the remote control to be memorised.
Power supply : 12-24V DC-AC
Relay capacity: 3A 250Vac-30Vdc
Dimensions: WxHxD mm. 60x94x28
Range: 50-80mt in free field
Memory : 400 different remote controls
Technical notes
The receiver is compatible with DITEC and Novotecnica 433 Mhz remote controls, both fixed code and rolling code: Ditec GOL4 - GOL4C - BIX LP2 - BIX LS2 - BIX AG4 - Novotecnica BIX L2.
Be careful not to confuse with similar models, but of different frequencies, if you don't know the exact model, contact us or send us an image to be sure.
The receiver memory can contain up to a maximum of 400 different codes.
It is also compatible with models of other brands, by clicking on the photo alongside you can see a list of the main compatible remote controls, if in doubt contact us.




