Sauna Control Models SL2 IS (IS SaunaLogic 2) (Model # 1601-37 & 1601-37-1) (Controls hereafter referred to SL2 IS-Series)

The SL2 IS Control is intended to be connected to the following CB Boxes: CB 14-1, or CB 15-1. 

MODEL SL2 IS 60 MIN CONTROL PANEL (1601-37) Traditional Sauna Operation Press the SL2 IS icon once and press the icon. The default bath time is 60 minutes and most customers enjoy temperatures between 150° and 165° Fahrenheit. Length of sauna can be set from 0 to 60 minutes. The time delay before start can be up to 24 hours. Any changes are remembered by the heater for your next bath. Should the heater power be lost then restored, the settings will return to their default values. SETTING THE DURATION AND TEMPERATURE Press the icon for time "+" or "-" icon to increase or decrease time for desired setting. The maximum of time is 60 minutes. Press the icon and then press "+" or "-" icon to increase or decrease temperature for desired setting. Note: Typical bathing temperature is 150°F to 165°F displayed on the control. Infrared Sauna Operation Press the SL2 IS icon once and press the icon. The default settings for the temperature is 149°F, the bath time is 60 minutes. These settings are adjustable (as described below) from 110° to 149°. Length of sauna can be set from 0 to 60 minutes. The time delay before start can be up to 24 hours. Any changes are remembered by the heater for your next bath. Should the heater power be lost then restored, the settings will return to their default values. SETTING THE DURATION AND TEMPERATURE Press the icon for time "+" or "-" icon to increase or decrease time for desired setting. The maximum of time is 60 minutes. Press the icon and then press "+" or "-" icon to increase or decrease temperature for desired setting. The maximum temperature is 149°F (65°C). Note: Typical bathing temperature is 115F to 125F displayed on the control. Starting ambient temperature below 70F will cause the IR system to heat slower, which may result in less effective performance. PRE-SET DELAYED START Press the icon and delay time will appear in the display and will toggle between “dlay” the amount of time remaining. The maximum of time is 24 hours. If no delay is desired, press button to toggle off the function.