EASY UP EZ TM-40U-95 TELESCOPING MAST

*CUSTOMER RETURN - MINOR COSMETIC FLAWS FROM BEING PARTIALLY ASSEMBLED, BUT DOES NOT APPEAR TO HAVE BEEN IN THE WEATHER. TAPE RESIDUE ON SOME SECTIONS. COMPLETE WITH HARDWARE*

UPS Shippable

Genuine Easy Up Product - Made in the USA

Perfect for mounting antennas for TV, Ham Radio, WIFI, Scanner, etc

Use in guyed or bracketed installations

28' assembled height

Mast hardware included

4 Sections of heavy duty galvanized tubing 

Features Rotating Guy Rings

Features a heavy duty thumbscrew/collar system for setting height

Weighs 40 lbs

Shipping Length: 95"

 NOTE: GUYS, GUY HARDWARE, ANCHORS, AND MOUNTS ARE NOT INCLUDED.

 ***EASY UP PRODUCTS ARE PROUDLY MADE IN THE USA***

• Contact with a power line can KILL you. Choose a safe installation site. 
• Mast must be guyed approximately every 9' at the top of each piece of tubing with the distance from the base of the mast to the anchor equal to the height of the mast attachment point. 
• Anchors should be spaced every 120" if three guy directions are used, or every 90" if four guy directions are used. 
• The base and all anchors must be properly grounded.
• Antenna load should not exceed 2 sq ft of surface area
• Do not attempt installation or dismantling if there is any wind or on a wet day
• Tie off mast with rope (non metal) to deflect away from power line if it should fall during installation or dismantling
• Use adequate and skilled help in working with this product and have an experience supervisor
• If you are in doubt as to the proper use or method of installation or dismantling, contact an experienced installer and your local electrical utility for assistance.