LED Cubes 6 Lighting Modes, 2Inch 120W White W/Amber LED Square Light Pod, Waterproof Off Road Fog Driving Work Light Bar for Offroad Truck SUV ATV UTV Boat with 16AWG 10FT Wiring Harness Kit
Comes with 6 lights, the lights are controlled by a double button switch wiring set and its control module, there is a start mode, then there is a long daytime running light + 5 amber patterns + white constant light, 5 amber patterns can be used as warning light functions, including Sequential Flashing, Space Led Flash Pattern, Space LED Strobe pattern, All Leds Strobe Together, All Leds Gradient Together. For more information, pls check the below instructions or videos attach.
Only 2 inches. Small design(only 2x2 inch) LED cube lights can be flexible mounted on any place, even in more narrow space applications, such as A-pillar, bull bar, rack, front or back bumper, OEM fog light position. Suitable for various Offroad, Car, Jeep ATV, UTV, RZR, Can-am, Tractor, Toyota Tundra, Ford, Boat with DC 12V-24V. The LED pods will be perfect to be used as driving lights, fog lights, work lights, off-road lights, reverse light etc.
Specifications:
Housing Material: Aluminum
Bracket Material: Stainless steel
Lens material: PC
Power:120W
Quantity: 3 Pair
Beam pattern: Spot
Light color: Amber light and white light
Lamp beads: 3030 chips
Number of lamp beads: 36Pcs total ( 12PCS White + 24PCS Amber）
Color temperature: 6000K & 3500K
Fit Model: Universal
Life time: 50,000 hours
Housing color: Black
Waterproof rate: IP68
Light Type: work light
Function Mode:
1. White: When power is off, the pattern that emerges is amber daytime running lights from left to right + from right to left + white light together, finally staying in the white light continuously lit light effect.
2. Amber DRL: Press the Mode Button
3. Sequential FlashingAmber: Press the Mode Button On the basis of the second step
4. Space (135-246) Led Flash PatternAmber： Press the Mode Button On the basis of the third step
5. Space (123-456) Led Flash PatternAmber： Press the Mode Button On the basis of the fourth step
6. All Leds Strobe TogetherAmber： Press the Mode Button On the basis of the fifth step
7. All Leds Gradient TogetherAmber： Press the Mode Button On the basis of the sixth step
* Super cool flood beam pattern design, nice performance even in foggy days, extreme weather conditions, or in low visibility road conditions. Nice fitment, easily replaces old dull filament light. Environmental-friendly: energy saving, no UV and IR radiation, shock-proof and anti-corrosion.
* Adopting 4PCS*6 LED chips total, emit 120W & 12,000LM, delivering 6,000K bright white Flood light, which providing wider illumination to light up dark environment to protect driving safety. W/6 Kinds of Amber Lighting(includes Amber DRL,Sequential Flashing, Space Led Flash Pattern, Space LED Strobe pattern, All Leds Strobe Together, All Leds Gradient Together), enhance driving pleasure, get notice out on the trail to let other drivers see your car. One light with 2 function: White light for lighting and DRL for get notice.
* 50,000H LIFESPAN - IP68 Waterproof rate and upgrade with moisture breather to reduce fogging situation. LED cubes build with aluminum alloy housing for anti-rust & anti-corrosion, more and decent cooling fins for efficient cooling,Unbreakable PC lens, Stainless steel mounting kits to to avoid rusting and bracket angle can be adjust up to 160°, Safety line protection, up to 50,000 hours lifespan.
* Easy installation, just connect Red and Black wires to the positive and negative power supply for White flood light, which providing wider lighting areas. Connect Yellow wire to your car original DRL line for Amber Daytime Running Light(DRL), Faster on/off response time and vibration resistant.
* Advanced circuitry and die-cast aluminum alloy heatsink designed fast and effectively extend the lifespan of the light bar to over 50,000 hours. IP68 Waterproof rate and upgrade with moisture breather to reduce fogging situation, more and decent cooling fins for efficient cooling.
* Universal fit for DC 12-24V vehicle and devices, such as: Honda, ATV, UTV, RZR, Can-am, Tractor, Toyota Tundra, Ford, Boat, 4WD, Jeep, Ford, ect. With mini design, only 2.3inch in wide, LED cubes can fit on most places without limit, such as A-pillar, bull bar, rack, front or back bumper, OEM fog light position
Application:
Off-Road vehicles-ATVs, SUV, truck, Fork lift, trains, boat
Specialized vehicles-Fire engine, police cars, rescue vehicle, Communication vehicle, military command vehicle etc.
Engineering vehicles-Excavator, dozer, road roller, bulldozer, crane and mining truck etc.
Step by step reference for product installation:
1）When receive the product, please check the integrity of all accessories.
2) Before installation, connect the product to the positive and negative terminals of the 12V DC external power supply or car battery to test whether all functions of the product can operate normally.
3) According to the length of the product's power cord, confirm the location where you want to install it.
4) Depending on the installation location requirements, customers need to purchase their own brackets or drill holes for installation.
Package Included:
6 x Car LED Work Light
6 x Stainless brackets
1 x Wiring Harness Kit
F & Q:
Q: How to connect the amber led pod lights?
- —— A: amber offroad lights can controlled via the "MODE BUTTON". When connecting, please connect the black wire to the negative pole, the red & yellow wires to the positive pole. (The function of the yellow line is to change the lighting mode)
Q: How to change modes?
- —— A: The different lighting modes can be change by MODE button. And you can manually cyle through all 6 modes to get back to white light.
Q: My led light pods gets water in it and gets moisture.
- —— A: When it gets moistures, you can just turn it on several times a day to dry the light. For the light pods watering, you need to check whether its housing is broken or the light bar may be a poorly assembled one. Or you can get hlep through the order page.
