Raspberry Pi Compute Module 4 Development Kit, With Waveshare PoE Board, Basic Accessories, And 7" Touchscreen
Compute Module 4 Development Kit C/D

Waveshare Compute Module 4 PoE Board, Useful Basic Accessories
And 7" IPS Capacitive Touch Display

Application Example

Dual-Display Support, Suitable For Video-Oriented Projects, And PoE Applications

image for reference ONLY, the CM4, 4.3" DSI LCD, and Camera Module are NOT included.
Compute Module 4 PoE Board

Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products

PoE Base Board for all Compute Module 4 Variants

What's The Differences
 
WAVESHARE CM4 POE IO BOARD
RASPBERRY PI CM4 IO BOARD
POEintegrates 802.3af-compliant PoE circuit (5V/2.5A)PoE header only
USB4x USB 3.2 Gen1 ports
Micro USB port		2x USB 2.0 ports
Micro USB port
ETHERNETGigabit Ethernet RJ45 with PoE supportGigabit Ethernet RJ45 with PoE support
HEADERColor-coded 40PIN GPIO header40PIN GPIO header
standard PCIe Gen 2 × 1 socket
FAN5V / 12V standard fan connector12V standard fan connector
POWER INPUT7V~36V12V
CM4 SOCKETsuitable for all variants of Compute Module 4
RTCReal-time clock with battery socket and ability to wake Compute Module 4
VIDEO2x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable)
CAMERA2x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable)
SD CARD SLOTMicroSD card socket for Compute Module 4 Lite (without eMMC) variants
DIMENSIONS160 × 90mm
Connecting With Compute Module 4

Standard CM4 Socket And Color-Coded Raspberry Pi 40PIN GPIO Header
Suitable For All Variants Of Compute Module 4

Rich Peripheral Connectors

Onboard Connectors Including CSI/DSI/RTC/HDMI/USB/ETH/TF Card

What's On Board
  1. CM4 socket
    suitable for all variants of Compute Module 4
  2. Power input
    7~36V wide range power supply
  3. Gigabit Ethernet connector
    Gigabit Ethernet RJ45 with PoE support
  4. USB SLAVE port
    allows burning system image into Compute Module 4 eMMC variants
  5. USB3.2 ports
    4x USB 3.2 Gen1 ports, for connecting sorts of USB devices
  6. HDMI ports
    2x HDMI ports, supports dual 4K 30fps output
  7. RTC
    RTC battery holder, allows RTC-related functions like wakeup, shutdown, reboot, and more
  8. CAM
    2x MIPI CSI camera ports
  9. DISP
    2x MIPI DSI display port
 
  1. FAN
    for connecting cooling fan, allows speed adjustment and measurement
  2. FAN power selection
    5V or 12V voltage to drive the fan
  3. IO-VREF/PoE selection
    CM4 IO logic level: 3.3V or 1.8V
    PoE: enable (EN) or disable (DIS)
  4. 40PIN GPIO header
  5. CAM0 and DISP0 I2C bus
    fit the jumpers when using CAM0 or DISP0
  6. Misc configurations
  7. Dual LED indicators
    red: Raspberry Pi power indicator
    green: Raspberry Pi operating statusindicator
  8. TF card slot (bottom side)
    insert a Micro SD card with pre-burnt system, to start up Compute Module 4 Lite
Outline Dimensions
Compute Module 4 Introduction
Completely Upgraded, More Powerful Raspberry Pi CM4
  • Upgraded processor BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC, more powerful performance
  • More options for RAM (1GB/2GB/4GB/8GB), competent for large-scale data compilation
  • Faster eMMC Flash storage, up to 100 MBytes/s data rate, which is four times faster than the CM3+
  • Option for fully certified radio module, the same one used on Pi4B, supports either PCB trace antenna or external antenna, more suitable for industrial applications
  • Adopts B to B connectors, more stable than the Goldfinger edge connector of previous generations
  • Onboard new Gigabit Ethernet PHY supporting IEEE1588, suitable for network applications
  • Onboard new PCIe Gen 2 x1 interface, allows connecting more useful modules

more detail...

Section Guide

ITEMDESCRIPTIONCM4 DEVELOPMENT KIT
ABCD
DSI adapter22PIN 0.5mm pitch to 15PIN 1mm pitch√√√√
CSI adapter22PIN 0.5mm pitch to 15PIN 1mm pitch, 15cm length√√√√
USB cableUSB-A to micro-B, 1.2m length√√√√
Power supply12V 2A√√√√
Base boardRaspberry Pi CM4 IO Board√√
Waveshare CM4 PoE IO Board√√
7" touchscreen1024×600 pixels, HDMI, IPS panel√√
Resources & Services

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

PACKAGE CONTENT

Weight: 0.683 kg

  1. Compute Module 4 PoE Board x1
  2. USB-A to micro-B cable 1.2m x1
  3. RPi Zero V1.3 Camera Cable 15cm (CSI adapter) x1
  4. Power supply 12V 2A x1
  5. CM-DSI-ADAPTER x1
  6. 7inch HDMI LCD (H) x1
Raspberry Pi Compute module 4 development kit