Catalytic Converter
Direct Fit Catalytic Converter
Direct Fit Catalytic Converter; Heavy Metal Series; Overall L-17.50 in.; O2 Sensor Location Pre/Post Conv.; Not Air Tube Kit Adaptable;
- Air Tube Adaptable: No
- Body Material: Stainless Steel
- California Air Resources Board (CARB): No
- Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
- Catalytic Converter Format: Pre-Catalytic Converter and Main Catalytic Converter
- Converter Body Size: OEM
- Converter Quantity: 1
- Core Substrate Material: Ceramic
- Emission: Non-California (49-State)
- Exhaust Component Mount Type: Uses Factory Hangers
- Exhaust Pipe Material: Stainless Steel
- Finish: Stainless Steel
- Gasket Or Seal Included: Yes
- Heat Shield Included: Yes
- Inlet Attachment Type: Bolt-On
- Inlet Inside Diameter: OEM
- Inlet Type: Bolt-On
- Material: Stainless Steel
- Mounting Hardware Included: Yes
- Outlet Outside Diameter: OEM
- Outlet Quantity: 1
- Overall Length: 17.500 in.
- Oxygen Sensor Location: Pre and Post Converter
- Recommended Use: Converter
- Series: HM Grade
- Subtitles: Federal / EPA Compliant
- Type: Direct-Fit
- Universal Or Specific Fit: Specific
- WARNING CA Proposition 65: No
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Durable 308 Stainless Steel Mig Welds
MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23882 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed specifically for the 1995-2000 Toyota Tacoma and interchanges with OE parts 18450-07020 and 18450-0C010, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
MagnaFlow Performance Exhaust got its start as a natural extension of Car Sound Exhaust Systems, Inc., our parent company, that specializes in superior catalytic converter technology. Car Sound Exhaust Systems, Inc. has spent 25 years earning a reputation as a market leader around the world. Today, we at Car Sound/MagnaFlow are extremely proud of this and stake our 25 years of experience and reputation on each and every one of our products. Each new product we develop is personally evaluated by me and tested by our team of designers and engineers, then field tested to ensure that these products meet our stringent quality and performance standards. On May 18, 2000 Car Sound/MagnaFlow Performance Exhaust was awarded the ISO-9001 certificate. ISO-9001 is an international quality standard created by the International Organization for Standardization to define quality management and manufacturing systems. It has 20 specific design, material, and process requirements that help MagnaFlow/Car Sound ensure customer satisfaction with our products and services. ISO-9001 certified companies are re-audited every six months to ensure that quality standards are maintained. Together, we stand united in our passion to deliver the best performing, most durable and capable exhaust components in the world. As we go forward, you'll slowly start to witness a change as we segue fully into the MagnaFlow Performance Exhaust brand identity, a name that has achieved global recognition. This change will simply help people from both sides of our business understand that high quality and high performance is part of our mantra and...it's in our name.
** Please contact us for shipping quotes to Alaska, Hawaii, Guam, Puerto Rico and International destinations **
Payment
We accept payment by any of the following methods: PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Returns & Warranty
Uninstalled products may be returned within 30 days of the purchase date. Buyer is responsible for return shipping. Original shipping charges will not be refunded. All returns are subject to a 20% restocking fee. Exchange of equal or greater value may not be subject to a restocking fee.
Warranty on product is replacement of part only for defects in materials and workmanship. No cash or compensation for labor will be given for defects in material and workmanship. Defective part must be returned in order for new part to be provided. Visit our store for futher details.
Shipping
We ship Monday-Friday and strive for orders to ship within 1-2 business days. We use UPS, FedEx and USPS for the majority of our orders but reserve the right to use alternative but comparable means to get you your product as quickly and efficiently as possible. All orders shipping UPS will require a physical address, please provide this upon ordering to expedite the shipping process.
International Buyers
Import duties, taxes and customs clearance and other charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to completing your purchase.
Catalytic Converter
Direct Fit Catalytic Converter
Direct Fit Catalytic Converter; Heavy Metal Series; Overall L-17.50 in.; O2 Sensor Location Pre/Post Conv.; Not Air Tube Kit Adaptable;
- Air Tube Adaptable: No
- Body Material: Stainless Steel
- California Air Resources Board (CARB): No
- Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
- Catalytic Converter Format: Pre-Catalytic Converter and Main Catalytic Converter
- Converter Body Size: OEM
- Converter Quantity: 1
- Core Substrate Material: Ceramic
- Emission: Non-California (49-State)
- Exhaust Component Mount Type: Uses Factory Hangers
- Exhaust Pipe Material: Stainless Steel
- Finish: Stainless Steel
- Gasket Or Seal Included: Yes
- Heat Shield Included: Yes
- Inlet Attachment Type: Bolt-On
- Inlet Inside Diameter: OEM
- Inlet Type: Bolt-On
- Material: Stainless Steel
- Mounting Hardware Included: Yes
- Outlet Outside Diameter: OEM
- Outlet Quantity: 1
- Overall Length: 17.500 in.
- Oxygen Sensor Location: Pre and Post Converter
- Recommended Use: Converter
- Series: HM Grade
- Subtitles: Federal / EPA Compliant
- Type: Direct-Fit
- Universal Or Specific Fit: Specific
- WARNING CA Proposition 65: No
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Durable 308 Stainless Steel Mig Welds
MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23882 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed specifically for the 1995-2000 Toyota Tacoma and interchanges with OE parts 18450-07020 and 18450-0C010, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
MagnaFlow Performance Exhaust got its start as a natural extension of Car Sound Exhaust Systems, Inc., our parent company, that specializes in superior catalytic converter technology. Car Sound Exhaust Systems, Inc. has spent 25 years earning a reputation as a market leader around the world. Today, we at Car Sound/MagnaFlow are extremely proud of this and stake our 25 years of experience and reputation on each and every one of our products. Each new product we develop is personally evaluated by me and tested by our team of designers and engineers, then field tested to ensure that these products meet our stringent quality and performance standards. On May 18, 2000 Car Sound/MagnaFlow Performance Exhaust was awarded the ISO-9001 certificate. ISO-9001 is an international quality standard created by the International Organization for Standardization to define quality management and manufacturing systems. It has 20 specific design, material, and process requirements that help MagnaFlow/Car Sound ensure customer satisfaction with our products and services. ISO-9001 certified companies are re-audited every six months to ensure that quality standards are maintained. Together, we stand united in our passion to deliver the best performing, most durable and capable exhaust components in the world. As we go forward, you'll slowly start to witness a change as we segue fully into the MagnaFlow Performance Exhaust brand identity, a name that has achieved global recognition. This change will simply help people from both sides of our business understand that high quality and high performance is part of our mantra and...it's in our name.
** Please contact us for shipping quotes to Alaska, Hawaii, Guam, Puerto Rico and International destinations **
We accept payment by any of the following methods: PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Payment
Shipping
We ship Monday-Friday and strive for orders to ship within 1-2 business days. We use UPS, FedEx and USPS for the majority of our orders but reserve the right to use alternative but comparable means to get you your product as quickly and efficiently as possible. All orders shipping UPS will require a physical address, please provide this upon ordering to expedite the shipping process.
Uninstalled products may be returned within 30 days of the purchase date. Buyer is responsible for return shipping. Original shipping charges will not be refunded. All returns are subject to a 20% restocking fee. Exchange of equal or greater value may not be subject to a restocking fee.
Warranty on product is replacement of part only for defects in materials and workmanship. No cash or compensation for labor will be given for defects in material and workmanship. Defective part must be returned in order for new part to be provided. Visit our store for futher details.
Returns & Warranty
International Buyers
Import duties, taxes and customs clearance and other charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to completing your purchase.
