If you order more than one product, we will refund the difference between the shipping price eBay estimated, and the actual shipping price.

The Lee Precision .278 Lube & Sizing Kit is the fastest and easiest way to lubricate and size cast bullets. The Sizing Die has Standard 7/8x14 threads which are compatible with most brands of Single Stage Presses. Bullets are pushed through the sizing die nose first so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are dropped into a container.

The Lee Precision Lube & Sizing kit is Intended for use on Single Stage Presses ONLY. Lee recommends bullets be relubed after sizing to be sure the sized portion is coated with Alox. All lead bullets MUST be lubricated but it is not absolutely necessary to size all cast bullets. Bullets must be sized if they are so large that they expand the case too much to freely enter the gun's chamber. Sizing sometimes helps accuracy by making the bullet uniform in diameter. Sizing helps ensure uniform start pressure and better accuracy.

• Steel sizing Die
• Sizer Punch
• Sturdy plastic container

features:

• Standard 7/8 x 14 threads are compatible with most brands of Single Stage Presses.
• Bullets are pushed through the sizing die nose first no special nose punches are needed.
• Gas checks are automatically seated and crimped in place.
• Sized bullets are captured in the special container.

• The Lee Precision Lube & Sizing kit is Intended for use on Single Stage Presses ONLY. The push through Punch is used in place of a Shell Holder in the Ram.
• Lee recommends bullets be relubed after sizing to be sure the sized portion is coated with Alox. All lead bullets MUST be lubricated but it is not absolutely necessary to size all cast bullets. Bullets must be sized if they are so large that they expand the case too much to freely enter the gun's chamber. Sizing sometimes helps accuracy by making the bullet uniform in diameter. Sizing helps ensure uniform start pressure and better accuracy. Gas checks can be installed with this tool. Simply place the gas check on the base of the bullet before sizing.

• Place bullets in provided red plastic container and drop in Lee Liquid Alox onto the bullets. Gently shake the bullets in an orbital motion to coat the bullets. If they do not coat completely add a little more lube. Spread the bullets onto waxed paper and let dry overnight. Load at least one bullet into a case and check to be sure it easily chambers in the gun. If it fits tightly you must resize the bullet before loading.

• Screw the sizing die into any standard reloading press. Exact depth is not important. Install the bullet punch into the ram. This fits all rams that use standard shellholders. Place the red plastic container with the lubed bullets inside on top of the sizing die. Place bullet on the punch and push the bullet through the die. When 3/4 of the bullets have been loaded lift the red plastic container off the die. Invert the holder before opening. For rifle and hot pistol loads it is best to relube the bullets to ensure the sized portion is recoated.