Power Steering Pump
Features and Benefits: Units are supplied with 100% tested and calibrated pressure relief valves., Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%., Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life., As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit., FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance., All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material., All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
FAQs: Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals., The end of the original pump's input shaft enlarged causing the pulley hole to increase during removal. The pulley must be replaced., The problem is not in the pump, it is in the steering gear. The pump would cause a steering problem in both directions., There may be debris in the flow control valve bore not allowing the flow control valve to move as it should. (Valve and bore are located behind the high pressure fitting on the pump). The system must be checked for contamination and flushed., Why do I still have hard steering in one direction after I replaced the pump?, Why is the pump making a whining noise all of the time?, I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?, I only have assist when increasing engine rpm after installing the replacement pump. What's causing this?, Should I ever change my fluid, even though nothing is wrong?, A whining pump is usually caused by air in the power steering system. Inspect the reservoir for proper fluid level. If fluid has foam or air bubbles present, air has entered the system or has not been properly bled (ensure all hoses/clamps are tight). Some systems require special vacuum bleeding procedures.
E-Waste: No
Power Steering Pump Outlet Quantity: 1
Power Steering Pump Outlet Attachment Type: Threaded
Power Steering Pump Inlet Attachement Type: Barb
Power Steering Reservoir Cap Included: No
Remote Reservoir: Yes
Pulley Attachement Type: Press-On
Hose Port Type: O-Ring
Pulley Included: Yes
Power Steering Outlet Thread Size: 16x1.5
Product Condition: Remanufactured
Mounting Hardware Included: No
Housing Material: Cast Iron
Reservoir Included: No
Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
| Make | Model | Year | Mfrlabel | Cc | Cid | Cylinders | Liters | Notes |
|---|---|---|---|---|---|---|---|---|
| Ford | Crown Victoria | 1999-2002 | Power Steering Pump | with Police/Fleet/Taxi Packages|Supplied with Pulley|Reservoir Not Included|In-Line Filter available|For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system | ||||
| Ford | F-150 | 2002-2003 | Power Steering Pump | 281 | 8 | 4.6 | with 6 Groove Pulley|Supplied with Pulley|Reservoir Not Included|In-Line Filter available|For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system | |
| Ford | F-150 | 1997-2003 | Power Steering Pump | 256 | 6 | 4.2 | Supplied with Pulley|Reservoir Not Included|In-Line Filter available|For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system | |
| Ford | F-150 | 2002-2003 | Power Steering Pump | 330 | 8 | 5.4 | with 6 Groove Pulley|Supplied with Pulley|Reservoir Not Included|In-Line Filter available|For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system | |
| Ford | F-150 | 1997 | Power Steering Pump | 4917 | 6 | 4.9 | Supplied with Pulley|Reservoir Not Included|In-Line Filter available|For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system | |
| Ford | F-150 Heritage | 2004 | Power Steering Pump | 330 | 8 | 5.4 | with 6 Groove Pulley|Supplied with Pulley|Reservoir Not Included|In-Line Filter available|For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system | |
| Ford | F-150 Heritage | 2004 | Power Steering Pump | 281 | 8 | 4.6 | with 6 Groove Pulley|Supplied with Pulley|Reservoir Not Included|In-Line Filter available|For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system | |
| Ford | F-150 Heritage | 2004 | Power Steering Pump | 256 | 6 | 4.2 | Supplied with Pulley|Reservoir Not Included|In-Line Filter available|For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system |