The grain mill grinder can mill the high volumes of grain to make flour and recipes incredibly easy. Owning your own grain mill will allow you to control exactly what goes into your bread, baking and other cooking and eating. In addition, grinding grains yourself means you will get more vitamins and minerals and their attendant health benefits.

The grain mill grinder adopts high speed motor as power, can quickly crushing all kinds of soft and hard materials, general medicine only half a minute can be crushed into 50-300 mesh， Applicable to the clinic, hospital pharmacy, traditional Chinese medicine processing of Chinese medicine and Chinese medicine shop grinding, health care products sales counter Valet processing, Research Institute, laboratory analysis and household food grinding grains (soy, corn, barley, rice, wheat, mung beans, coffee beans), spices (star anise, fennel, pepper, rosemary) ,herbs ,sesame, peanuts, walnuts. It is applied to milling work of dried food such as herbal medicine

1. The materials ready for grinding must be dry.

2. Recommend grinding capacity one time：the material you gonna to grind one time must cover the long blade in the middle and no more than 2/3 of the tank.

3. Recommend use time: no more than 3 minutes. It takes 5-10 minutes to rest after every 3 minutes of work.

4. Please do not turn on the machine when the top cover is open.

5. Please change the barbon brush and blade afer long time use.

6. Please check the screws of the blade.

7. CANNOT be cleaned with water directly. You can clean up the remaining powder inside the jar with a cleaning brush and then wipe the inside of jar with a dry cloth.

8. To remove the blades, Use a screwdriver to hold down the middle screw, and Drive the wrench or sleeve counter-clockwise to loosen the locknut on the blade

9. Sometimes the grinder machine is not working,such as bad smell or smoke. Please don't worry and cut off the power. Check whether the CARBON BRUSHES are loosing ans Please Tighten the carbon brushes on both sides or Reducing the amount of grinding powder then try to start the grinder.

10. The working principle is to crush the material into powder by the high speed rotation of the blades. The whole process takes place in an enclosed grinding chamber, which generates heat and causes the machine to heat up. Therefore, it is normal for the grinder to be slightly heated.

11. When it starts up, please shut off the power supply immediately if the blade is stuck by the smashing materials and the motor does not run (buzzing noise occurs) to avoid burning the motor, and then remove the blocks, check the fuse and restart the machine.