Product Description

2024 New Production replica rigid rear fender has a 3 rib indent on the rear chain relief cut out. Fender is fully assembled and riveted together with hinge. Fender features a raw finish and 7/8 inch wide strap for braces.

Key Features

• Fender hinge construction updated 2024.

Motorcycle Fitment

• Harley-Davidson FL (1955-1957)

Technical Notes

• Underside of fender includes wire loom track welded in place side loom track and 2 clips to hold spring loom cover. Spring type flexible loom available separately. All hinged fenders must be hand fitted at the hinge and pin area. Alignment needs to be adjusted and tweaked to fit your components. Before finishing with primer or painting fit the fender body braces mounting points in place and check the alignment of fender tail and bracket. Fender rivets hinge and brackets need to be tweaked for final fitment. Patience is required for proper installation! *NOTE: Chain panel with ribs is built-in as one piece with the fender. Features cut out for 1955-69 tail lamp. *NOTE: Replacement fenders ordered through H-D dealers came with 3/4 inch brackets that are inchover the counter inch replacement not OEM-installed by the factory. Constructed with 3/4 inch fender brace.*NOTE: Use with license plate bracket replica tail lamp primer and tail lamp with glass lens.
• Fender hinge construction updated 2024.
• Underside of rigid rear fender details: A) Wire Loom Spring B) Hinge Junction C) Loom Clip Strip on Fender Radius D) Spring Clip E) 7/8 inch Wide Brace F) Ribbed Chain Panel.
• Important: Replacement fender ordered through H-D dealer came with 3/4 inch brackets. These were over-the-counter replacements not OEM-installed at the factory.

Recommended Companion Parts

• Suggested companion part: 33-0300 — Stock Type Chrome Oval Tail Lamp.
• Suggested companion part: 50-1250 — Wire Loom Fender Strip Raw.
• Suggested companion part: 33-1804 — Tail Lamp With Glass Lens.
• Suggested companion part: 33-0299 — Replica Tail Lamp Primer.
• Suggested companion part: 33-1551 — License Plate Frame Bracket Black Underside Of Fender.

Specs / Product Details

• V-Twin Part Number: 50-0366
• Manufacturer: V-Twin
• Manufacturer Part Number: 59699-55
• Origin: Imported
• Unit of Measure: EA
• OEM cross reference part# : 59699-55
• Large Loop Width: 1/2 inches
• Narrow Loop Width: 3/8 inches
• Pin: 5.4mm
• Width: 7/8 inches
• Strap Brace Width: 7/8 inches
• Fender Width: 7-1/4 inches

Related Parts (sold separately — search OUR STORE)

• Accessory: 50-0363 — Raw Rigid Rear Fender Assembly
• Replacement: 50-2237 — Rigid Rear Fender Shell Raw
• Accessory: 50-0429 — 1949-54 FL Rigid Rear Fender
• Replacement: 50-1199 — Rear Fender Tail End with Hinge
• Accessory: 50-0372 — Rigid Rear Fender Assembled
• Replacement: 50-1576 — Swingarm Rear Fender Hinge
• Accessory: 50-0324 — Big Twin Rigid Rear Fender Raw
• Replacement: 50-1250 — Wire loom Fender Strip Raw

Shipping & Returns

• Please review estimated delivery timing and shipping service on the listing.
• Returns are handled according to the listing return policy.

Please review photos, specifications, fitment details, and notes carefully before purchase.