New Never Powered PT-LINK II - Only Bid if you have experience in setting these up. Must have computer experience in computer communication protocols. Buy with confidence. The picture listed is not the actual product. Same exact product, but actual serial number will be different. Serial number will be recorded.
The OE368-23B-BACnet4 MS/TP PT-Link II (Protocol Translator) is used to provide bi-directional translation of data and information between a specific communication protocol and the Orion HVAC unit controllers. Protocol specific plug in modules currently allow the PT-Link II to communicate with BACnet MS/TP protocol devices. The Orion PT-Link II also provides you with the WattMaster trademarked “Protocol Adaptability” feature. This provides for integration with any future protocols that may be released by means of a simple plug-in module on the PT-Link II. The PT-Link II is supplied complete with one communication protocol module installed. The BACnet MS/TP protocol allows up to (4) Orion controllers to be connected to the PT- Link II Protocol Translator. An unlimited number of individual PT-Link II Protocol Translators can be used on your project. The PT-Link II provides the following features: The PT-Link II BACnet4 can operate at baud rates of 9600, 19200, 38400, or 76800 or Baud as required by the specific protocol being used. Allows for dipswitch configuration. Designed to provide values from points on the Orion controller side of the gateway to devices using other protocols as if the values were originating from the protocol device objects. Ability to allow devices with another protocol to modify point values on the Orion controller side of the gateway by using their standard protocol write services. Devices with another protocol can place the Orion Controller into occupied or unoccupied operation on the Orion controller side of the gateway by using their standard protocol write services.