About this item

Product Dimension: Measures 11.81 x 7.09 x 14.25 inches (L x W x H); Note: Please check the product size before purchase; For more details, refer to the instruction manual, troubleshooting guide, and instructional video to get a quick start before use
Continuous Performance: 3 minute runtime and 40 minute cool down; If the shredder goes beyond 3 minutes, it will automatically shut off and trigger a 40-minute cool down period to prevent overheating
P-4 High Security Level: Bonsaii paper shredder can shred up to 5-6 sheets of paper at a time into small pieces measuring 13/64 x 45/64 inches (5 x 18 mm)
Portable Design: Bonsaii home shredder features a portable handle design, allowing you to place it in a corner
Easy Operation: Auto start / stop and manual-reverse functions protect the paper shredder from the frustration of paper jams
Crosscut Shredder for Home: This crosscut shredder with a 3.4-gallon wastebasket that can accommodate 180 sheets of A4 paper, reducing the need for frequent emptying

Product Description

Home office shredder has the Jam free and overheated protection function, it is a good helper for your life.

Cross-cut Shredder perfectly protects your privacy (security level P-4), helps you minimize information leakage.

Shredders for Home Office Heavy Duty

If the shredder runs continuously for more than 3 mins, may overheat. Please shut down the machine and cool down for 40 mins to recover.

Auto

Once detects papers, it will start to auto shred, when shred papers are more than the maximum capacity, you can use Rev mode to clean jam.

C237-B

This shredder can easily crush paper, staples, paper clips, can also destroy ATM receipts, credit cards, Except old newspapers.

IMPORTANT Q&A

Q1: Why doesn't the shredder work after plugging in?

Please make sure you assemble the shredder head and basket in the correct directions. The front of the shredder head should be aligned with the each side of the trash can.
Overheating Protection, this design with 3 minutes continuous run time with 40 minutes of cool down after use again.
Paper jams can also be one of the reasons for not working- Please use the FWD and REV functions to clean up the cutter scraps.

Q2: The cross-cut shredder is jammed. What should I do?

Please switch to FWD mode and shred the jammed paper compulsorily. If there are too many paper scraps in the feed slot, slide to FWD mode for a few seconds and then to REV mode for a few seconds to clear it.
With stubborn situations, you may need to clean the jammed paper with shredder oil. Start by drizzling oil into the feed slot where the paper is jammed. Let it soak for about 30 minutes, and turn the shredder to Auto-On mode, a rigid sheet of cardstock (or folded file folder) can be fed into the shredder to help push the jammed paper through With the shredder unplugged.

Q3: Why is the number of sheets that can be shredded lower than the maximum number of sheets described?

Please check if the paper is damp, contains plastic is too thick, if so, please let the paper dry before shredding, or remove the plastic part, or reduce shredding papers per pass. To extend the lifetime of the paper shredder, please don't shred more than 5-6 sheets at one time.

Use Tips

Refer to the user manual, troubleshooting guide, and instructional video before use.
To avoid paper jams caused by overloading the machine, check and clean the cutter in good time.
Please wait until the paper is completely shredded before adding new paper.
When the bin is full, please clean it out in time to avoid affecting the reversing function and making the machine unusable.
The machine has an overheat protection device. After the overheat protection has been triggered during the previous use, please cool down for more than 40 minutes before shredding the next time.
Shredder Oil Packs are recommended to regularly sharpen, clean and lubricate the shredder blades for optimum shredder performance. *When using the oil pack for cleaning, please take care to empty the waste bin of shredded paper first.
To prolong the life of the shredder, it is recommended to regularly clean both the shredder bin and the dust inside the machine.
Do not spray or keep any aerosol products in or around the shredder.
Why does the machine has odd smell after overheating? When the shredder enters overheating protection, the machine has already generated a lot of heat due to the load. There is an insulating oil coating on the motor that volatilizes a slight odor when heated. Please don't worry，this is normal phenomenon.