2" Plastic Inline Globe ValveInline valves are used to control the flow of water to one or more irrigation zones. Each zone can be regulated with its own valve to accommodate different watering schedules. Time and duration of flow are regulated from a 24 VAC controller. This 2" inline globe valve is compatible with any 24 VAC controller. Connects with FPT (female pipe thread) inlet and outlet ports.This is a hydraulically operated, diaphragm-actuated control valve that opens and closes electronically with a 24 VAC solenoid controller. It automatically closes upon loss of control signal or upstream pressure.A flow control knob regulates the amount of water passing through the valve when open. It can also be used to override the controller by closing the valve in an emergency.3-Way Controller:The 3-Way controller regulates the flow of water to the control chamber in Auto, Open or Close modes, depending on the direction the selector is pointed. When set to Auto, the valve is actuated by a 24 VAC controller. Open and Close settings manually override the controller.Closed: When upstream pressure is applied to the control chamber, the diaphragm is pressed down to close the valve drip-tight.Open: Relieving the water or air pressure to the atmosphere from the control chamber opens the valve.Auto: The automatic port of the 3-way selector is connected to a solenoid which controls the valve to Open or Close based on the controller's schedule.2" Plastic Inline Globe Valve Specifications:Solenoid: 24 VACBody Style: Inline Globe ValveOperating Pressure: 5-150 PSIMaximum Flow Rate: 110 GPMPlastic nylon construction