ANYCUBIC Wash and Cure 3
|
Larger Size for Upgraded Capacity
Compared to Anycubic Wash & Cure 2.0, the Anycubic Wash & Cure 3 has an impressive 100% increase in cleaning basket capacity,
now at 3 liters. The total volume of the cleaning bucket has been expanded to 4 liters.
This makes it perfectly tailored for LCD (light-curing) 3D printers with a size of 7.3 inches or less.The curing size has increased by 15%,
up to 160*180 millimeters, to accommodate larger and more models for single post-processing session.
  Localized Strengthening, Uniform CuringThe "Innovative Flexicure Gooseneck Light Design" increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the curing effect on subtle areas such as the top of models and the hem of garments.  By adopting a brand new arrangement of light beads and lens light source, Anycubic Wash & Cure 3's curing uniformity has been enhanced by 20% compared to its predecessor 2.0. This results in a more thorough and comprehensive curing of the entire model.  Dual-layer Design, IPA SavingThe double-layered PP material cleaning basket is designed to support simultaneous cleaning with the platform. It features two adjustable heights at 100mm and 165mm, providing flexibility to accommodate printing platforms ranging from 5.9 inches to 7.3 inches. This design maximizes the efficiency of IPA usage.  Simple Operation, Quiet and EfficientCleaning and curing dual modes, easily selected with one click; Enhanced Gooseneck light curing mode can be easily toggled on and off with one click. Infinite rotary knob control, adjustable from 1 to 30 minutes at will.  Through a more sealed structural design and software optimization, the noise interference generated during cleaning and curing is reduced[1], creating a quieter and more comfortable working environment.  [1] Measured by Anycubic Laboratory the maximum sound < 65dB in the operating state of the machine. Models Display   In The Box  |
ANYCUBIC Wash and Cure 3 Plus
About this item
- 【Higher Compatibility】Anycubic Wash and Cure 3 Plus upgraded the washing size 8.97''x5.03''x10.23''. And compared with Wash & Cure Plus, the washing volume of the washing basket is increased by about 13.4% to 7.6L, which is suitable for more LCD 3D printers like Photon Mono M5s, Saturn 3 series or other 10.6 inches and below.
- 【Flexicure Gooseneck Light】Due to the innovative Flexicure gooseneck light design, Wash & Cure 3 Plus can increase the energy value by 30,000uW/cm²* in the 1~3cm irradiation range, which greatly enhances the solidification effect of the top of the model, the figure skirt, and other subtle areas, plus the light tube can be twisted, making it more convenient to use
- 【Better Curing Effect】The Anycubic Wash & Cure 3 Plus features a brand-new arrangement of lamb beads combined with a lens light source. It offers a 20%* improvement in curing uniformity than previous generation Wash & Cure Plus. This results in a more thorough and comprehensive overall cure of the model, ensuring better quality and consistency.
- 【Efficient IPA utilization】The dual-layer PP material cleaning basket supports washing with platform and rust-resistant. It is equipped with two adjustable heights of 150 mm and 250mm allowing printing platforms from 6.6 to 10.6 inches, maximizing alcohol usage efficiency.
- 【Dual-layer Curing】A specially designed double-layer curing platform increases the number of models cured per cycle and markedly improves curing efficiency..
In The Box
Comparison
(Cleaning without platform)
(Cleaning with platform)
228*128*250mm
192*120*235mm
ANYCUBIC Wash and Cure MAX
Models Display
- 【Amazing Wash & Cure Sizes】, ANYCUBIC wash & cure max can hold up to 14.9 liters (15.7 qts.). The impressive maximum cleaning size of 11.8’’ x 6.5’’ x 11.8’’ (300*165*300mm), is compatible with all ANYCUBIC resin printer, and works well with consumer-grade resin 3D printer measuring 13.6'' and below available on the market.
- 【Dual Cleaning Mode】, the adoption of two brand-new modes of spray rinsing and detail dipping ensures efficient and thorough cleaning to 3d prints. Spray cleaning eliminates residual resin from the print surface with powerful mechanical jets, while dip rinsing effectively removes resin from intricate details on the underside, cleaning in one pass.
- 【Detergent-Efficient】, Wash & Cure Max's full cleaning process requires only 4L of detergent to be prepared and can be recycled with no direct contact throughout, saving more than 50% on detergent compared to traditional wash and cure station. One bucket of detergent supports the cleaning of 20 models of 10.1" height, and the loss of alcohol in a single cleaning process is less than 50ml.
- 【One-click Washing and Curing】,The cleaning and curing process is scientifically set up at the factory, just click the auto button and start it, the wash & cure max will automatically cure the 3d models after cleaning them. Experience streamlined model processing that saves you time and effort.
- 【360° Dimensional Curing】, Featuring a 360° automatic rotating curing platform, this machine provides higher curing energy values and longer irradiation distances, enabling comprehensive, efficient curing for your models.
Tech Specs
In The Box
On 18/03/2025 at 15:03:03 AEDT, seller added the following information: