Disclaimer
This is not an officially licensed product and is only considered Fan Art. Fan Art is protected under fair use.
This is a multi-listing for a commission service for printing and or painting the specified model kit.
This is a Multi Part Resin Kit that will require some modelling skill to assemble.
Ilulu Size(NOT INCLUDING BASE):
1/6 = 21.5cm
1/8 = 16cm
1/10 = 13cm
1/12 = 10cm
1/16 = 8cm
1/24 = 5cm
Quetzalcoatl Size(NOT INCLUDING BASE):
1/6 = 30cm
1/8 = 23cm
1/10 = 18cm
1/12 = 15cm
1/16 = 11cm
1/24 = 7.5cm
The figure comes attached to supports, it is recommended to submerge the figure in warm water to help aid with removal of the supports or be very careful to use a scalpel and cut as close to the figure as possible, not a lot of pressure is necessary to remove the supports.
If you select DIY Kit the model is unpainted and unassembled.
The figure comes attached to supports, it is recommended to submerge the figure in warm water to help aid with removal of the supports or be very careful to use a scalpel and cut as close to the figure as possible, not a lot of pressure is necessary to remove the supports.
If you select commission then i will assemble and paint the model myself, the paint job will consist of a basecoat, highlight, shade, black lining and a subtle edge highlight depending on the texture to be depicted.
Licence
I am licenced to print and sell this model. I are authorised to print and sell models from Torrida, Texelion and Officer Rhu. More will become available over time. Check them out!
Is there an issue?
I work very hard to keep my customers happy. If you have any problems please don't hesitate to contact me and i will help in any way I can.