Ariel: JGS-1 High Tension, JGS-1 Low Tension
Arrows: VRG220, VRG330
Caterpillar: G3400 Series
Chrysler: Thru 1974 H225, HB-225, HB361, HB383, HC361, HT361, HB413, HC413, HB170,
HT413, HB426, HC426, H170, IND53, IND56, IND56A, IND56, IND56A, LH318, H170, HB170, H225, HB225, HB361, HB383, HC361, HT361, HB413, HC413, HT413, HB426, HC426
Cummins: No. 173416 5/8" Reach w/N677 Gasket (w/ special adapter), No. 90210035,
90210036 3/4" Reach
Dorman: 3DAG, 4DAG, 6DAG, 6QG, D ATG4, 6, 6SEG, 8SEG, 12SEG, 6SETCWG MinNox
Ford: 158, 175, 201, 256 cid
GM: 305, 351, 401, 478, 702, CNG, Gasoline, 305, 351, 401, 478, 702 LPG, CNG
International: C-537, C-605
John Deere: 300 Series
J-W Power: Superburn Pre-Cell
Liebherr: G 924 T, G 924 TC, G 926 T, G 926 TC, G 926 TC 40
MAN: E 0824 E 301, E 0824 E 302, E 0826 E301, E 0826 E302, E 2842, E 2842 LE, E 2843 LN, E 2876, E 2866 LUH01
Volvo Truck: GH10C, MG9
Waukesha: H1077G, H1077GSI, L1616G, L1616GSI, VRG220, VRG330, VRN265, VRN283, VRN310, F11G, F11GSI / CSID, P2154G, P2154GSI, H1077G, H1077GSI, L1616G, L1616GSI
Wisconsin: W2-1230 Serial #5996538 & Up, W2-1235, W4-2460, W2-1250
|
Tech Notes |
Thread: M14x1.25mm Gap: 0.011" (0.3mm) Hex: 13/16" (20,8mm) Reach: 3/4" (19mm) Seat Type: Gasket Torque: 20 - 30 Nm Material: Iridium / Platin
The Denso GE3-1 6080 Iridium Saver spark plug is constructed with the most modern ceramics that have a finer-grain and are possess molded-in higher pressure. The higher density of the GE3-1's ceramics helps to prevent the insulator from electrical breakdown. The Denso GE3-1 industrial spark plug also has better corrosion resistance thanks to special nickel plating. Incorporated into this industrial spark plug are four small electrodes. These electrodes create a cross groove for improved sparking performance. Innovation also suppresses voltage dispersion which provides for a reduction in required voltage. The wear resistance of the spark plug is improved thanks to the high welding point of Denso's iridium alloy. The most taxing engine conditions are reliably handled by the spark plug. The GE3-1 is manufactured with 360° laser welding that creates an incredibly tight seal. This seal prevents premature spark plug wear. The ignitability of the Denso GE3-1 is resilient thanks to the 0.7mm center electrode. For applications where high-reliability and the ability to endure high combustion pressures are required, the Denso 6080 GE3-1 is a clear choice. Denso incorporates a stress-resistant monolithic resistor which helps to eliminate high-energy coil interference and noise in electronic equipment. The Denso GE3-1 industrial spark plug is extremely effective in bio-gas engines and offers world-class durability and performance thanks to the double iridium electrodes.
| |
|
