This Pro-X cast piston kit is for the Honda H100 single, 4-Stroke Years 1950-2019 +2.00mm oversize

Features a new PRO-X piston kit, Part # 01.1095.200 Fits 52.00mm bore.
 A qualified machine shop is required to bore and hone your cylinder to the proper piston to cylinder clearance.
 

 READ THIS BEFORE PURCHASING :

BUYER TIPS ON PURCHASING THE CORRECT PISTON SIZE.

To determine which piston size you require there is a very important first step. Always measure your cylinder bore size first. This is only size that matters! 4-Stroke pistons are listed by size to FIT the cylinder bore size. Measuring pistons to determine what to purchase will most likely cause you to purchase an incorrect piston to fit the cylinder bore. 

4-Stroke pistons are manufactured with a cam shape. They are never straight and round. Measure a 4-stroke piston at the bottom of the piston skirt, ninety degrees from the wrist pin hole. This measurement only is used determine piston to bore clearance. Do not try to match a size from a used piston. This will always produce a faulty measurement. Used pistons wear out and change shape. 

Buyer Tip: Before purchasing, remove your cylinder to be inspected and measure for bore size. 

 PRO-X pistons are quality OEM type and supplied with rings, pin, clips for a smooth rebuild. 

Picture is for reference and is the exact item listed.

You will receive Qty. 1 each piston kit part number 01.1095.200 when purchasing.