WB5 5 in 1 LED Strip Controller Voice Control WIFI Zigbee BT Mesh DIM CCT RGB RGBWC with Alexa and Google Assistant

Features:

The controller adopts the most advanced PWM control technology and hasmemory function (the light status will remain the same as the State before turning off the light). Wireless and 4G controlled by the "Tuya Smart" app.

Product model:

WB5 LM051 LM052 LM053

Static color: Single color, CCT, RGB, RGBW, RGBCCT, 5 IN 1

Input voltage: DC12V~24V (5.5*2.1mm).

Output: Total max. 15a. (7.5A/channel-only Color, CCT) ( 6A/Channel - RGB, RGBW, RGBCCT, 5 IN 1 ).

Working temperature: -20~60°C.

Communication mode: WiFi-IEEE 802. LM051 Need With GW01W WIFI Gateway

11b/g/n 2. 4GHz. RF: 2.4GHz.

Please note:

Use the "Smart Life" app or the "Tuya Smart" app to control that controller.

Output power: 12V<180W, 24V<360W  

Static Power Consumption: <1W

Compatible with Alexa and Google Assistant Alexa, turn on/off {light name}Alexa, set {light name} to 2014-2018

Alexa, dim/brightness {light name}Alexa, increase/decrease {light name}

Use the "Smart Life" app or the "Tuya Smart" app to control WB5.  The Miboxer app cannot be used to control WB5.  If you have purchased WL5 before, you can switch the app to the "Smart Life" app or the "Tuya Smart" app.

Setup button: Press and hold "SET" for 3 seconds, when the purple pilot lamp flashes, the device enters Link/Unlink mode and Smart Link mode.  (Note: Bluetooth control will be available after pairing using the WiFi app.)

Switching Output Mode: Briefly press the "SET" button to change the output mode. The flickering of the pilot lamp means changing correctly. The different colors that flash correspond to different output modes.

Attention:

1. Check if the input voltage of the constant voltage power supply agrees with the controller, and check the connection of both cathode and anode.

2. The Working voltage is DC12~24V, the controller will break if the voltage is higher than 24V.

3. The non-professional user cannot disassemble the controller directly, otherwise it may cause fire and electric shock.

4. The working temperature is -20~60°C.Do not use the device for direct sunlight, humidity and other areas of high temperature.

5. Do not use a controller around the metal area and high magnetic field, otherwise it will adversely affect the control distance.

6. When the 15A device loads a, the cable diameter should be greater than 1.5mm2.