High quality Titanium Gr5/TC4 M6 x 1.0mm Left-hand thread, 12 point flanged Nut
Suitable for: Garrett T2, T25, T28, GT30, GT32, GT35, GT28R, VT2 and CT26 Turbo shafts
8mm spline socket with 1/2" drive option available. Just add to your basket!
- These nuts are suitable for the Garrett T2, T25, T28, GT30, GT32, GT35, GT28R, VT2 an CT26 Turbo shafts.
- The material is grade 5 titanium, most widely used titanium alloy. Ti-6Al-4V also sometimes called TC4, Ti64 or ASTM. It has excellent corrosion resistance to salt water, marine atmospheres and a variety of corrosive media temperatures below 300 ° C.
- When using these nuts with another titanium fasteners, such as a bolt or stud, it is important to apply either an anti-seize grease such as molybdenum disulphide or copper ‘slip’ grease.
- Failure to apply anti-seize grease (on non-safety critical fixings) may cause the threads to gall on final torque of fastener and a seized/damaged thread.
- For safety critical applications, do NOT apply anti-seize grease; apply a thread locking solution (e.g Loctite medium strength) on the threads before assembly.
- Recommended maximum tightening torque for a Titanium M6 x 1.0 fastener ~15 Nm (Always check any particular torque specifications for your application).
Technical details
- Environment: High temperatures / wet &/or corrosive
- Density: 4.43 g/cm3
- Melting temperature: 1650 deg. C
- Ultimate tensile strength: 135 KSI (950 MPa)
- Yield strength (0.2% offset): 125 KSI (880 MPa)
- Elongation: 15%
- Hardness: Rc 34
- Tool: 8mm 12 point socket available to add to your basket.
Looking for other Titanium fixings? Have a look at my other listings for nut and bolts and other interesting stuff....