Phono Cartridge Connector Pins Bulk Pack of 20 Each Crimp and/or Soldered Pins Which Can Be Attached To Phono Wire Leads.  CRIMP OR SOLDER ... OR BOTH for best connection!

Qty DISCOUNT attention Repair Departments and Wholesalers can purchase at a discount when buying 3 or more.  Purchase today, limited quantities. 

What You Get:

Qty 20 - Pins

Shipped First Class With Tracking.

Connector pins can be used for many Cartridges, Headshells and Turntables including Technics , Sony , Marantz , Pro-ject , Crosley , Sansui , AR , BSR , Denon , Fisher , Garrard , Kenwood , KLH , Luxman , Onkyo , Thorens , Optonica , Panasonic , Pioneer , Rotel , Sankyo , Toshiba , Yamaha , VPI , Zenith . Cartridge Bodies Made By Shure , Ortofon , Sumiko , SME , Grado , Dynavector , and many more bands.  

The picture showing wire leads are just examples of how to BOTH crimp and solder using a similar pin.  

Hook-up Information Onto Color Coded Wire Leads:  

   Right Hot Positive           (Red color wire) 

   Right Ground Negative   (Green color wire) 

   Left Hot Positive              (White color wire) 

   Left Ground Negative      (Blue color wire) 

Pins may need to be resized slightly before sliding on the pin of the cartridge or headshell.  You want to fit them snug, you want excellent contact. You may need to use a long nose pliers (see picture of pliers for more instructions) to just slightly squeeze or you may need to ream the pin open so it is slightly larger to fit snug.  BE VERY CAREFUL DURING INSTALLATION, DO NOT CRUSH PINS, WE ARE NOT RESPONSIBLE.  We are offering 20 in the pack so if one or more breaks you have back-ups.

Thank You

Fred's Sound Of Music Audio Video Inc.  Since 1948