9005 LED Headlight Super Bright Bulbs Kit 6000K Xenon White 330000LM HIGH BEAM
About this item
- 【✅✅✅300% BRIGHTER✅✅✅】Each 9005 led headlight bulb has top automotive grade LED chips ( 60W, 33000LM, 6000K white ) which make it 3 times brighter than traditional halogen bulbs.
- 【✅✅✅EXCELLENT BEAM PATTERN✅✅✅】The 9005 led headlight bulb high and low use same beam pattern as original halogen bulbs but can deliver wider and further range light on road, without any dark spots nor glare to the oncoming traffic to ensure you a safer driving.
- 【✅✅✅50,000 HOURS LIFESPAN✅✅✅】The 9005 headlight bulb is equipped with a full aviation aluminum body，ensure you the longest life duration while making bright and continuous 9005 9006 H11 led light.
- 【✅✅✅5 MIN SIMPLE INSTALLATION✅✅✅】The 9005 led headlight bulb can be installed within just 10 mins by simply plugging and playing. It is also IP67 waterproof, dustproof and cold resistant (-40℉~+105℉) that you are worry free to use under all types of weather conditions.
- 【✅✅✅CAN bus-Ready for 98% Vehicles✅✅✅】 Our bulbs work with 98% of vehicle's computer system without error, while some sensitive models may require additional CAN bus decoder to be installed.
Specifications:
-
Brand: Bricologht
-
Condition: 100% Brand New
-
Light Source：2 Sides Bricologht LEDs
-
Material: Aviation Aluminum + ABS
-
Color Temperature: 6000K
-
Working Voltage: 12V
-
Output Power (Each): 60W
-
Number of Bulbs: 2
-
Waterproof Rate: IP68
-
Luminous Flux: 33000lm
-
Working Temperature: -40℃ - +80℃
-
Bulb Type: 9005/HB3
-
Beam Type: Low Beam
-
Beam Angle: 360 Degrees
-
Lifespan: Over 50,000 hours
-
Heat Dissipation Principle: Heat Pipe Technology + Aluminum Radiator
-
Fitment Type: Direct Replacement
-
Placement on Vehicle: Front, Left, Right
-
Color: As the picture shows
Package Included:
- 2 x 9005/HB3 LED Headlight Bulbs High Beam
- New and old packaging will be shipped randomly
Install Caution
-
As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
-
Put the vehicle into park or make sure it is securely in gear.
-
Make sure to have the ignition turned off and the keys removed.
-
Be careful to avoid burns, especially when turning on or off the vehicles lighting.
-
Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
-
Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
-
Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
-
Please install car headlight dust cover to ensure the normal operation of the lamp (to prevent dust and small ribbons to reduce the chances of bulb cooling fan broken to ensure the normal operation of the cooling system)
