We stand behind every product we sell.
All of our brand new items come with a 30-Day money-back or exchange guarantee.
|
|
||||||
|
|
|
|
|||
Harmonic Balancer For HONDA CR-V 2.0L 1972CC L4 DOHC 1997-2001 CrankShaft Pulley
Bad Harmonic Balancer :Signs to Watch Out For
When this component fails, it can cause a range of issues. The most common symptoms of a bad harmonic balancer include:
- Engine Vibrations
- Noticeable Harmonic Balancer Wobble
- Unusual Noises
- Illuminated Check Engine Light
- Visible Wear or Damage
Harmonic Balancer Replacement:
Step 1: Prepare the vehicle. Jack the vehicle up high enough to obtain access to the harmonic balancer, located on the front of the motor and attached to the crankshaft
Step 2: Remove the accessory drive belts. On many modern vehicles, there is an automatic, spring-loaded belt tensioner that can be rotated to loosen the belt.
You may need to use an open end wrench or ratchet handle, depending on the design. Older vehicles, and some newer ones, require you to loosen a mechanical tensioner.
Note: Use your cell phone to take a picture of the belt routing for future reference.
Step 3: Remove the harmonic balancer bolt. Remove the harmonic balancer bolt by using the strap wrench to hold the balancer still.
Step 4: Remove the harmonic balancer unit. Using the gear puller, place the hooks in an area that will not easily break, like the lip of the pulley section.
Note: Most harmonic balancers are kept from rotating on the crankshaft by using a woodruff key. Don’t lose the woodruff key; you will need it for reassembly.
Step 5: Install the new harmonic balancer. Align the woodruff key slot in the new balancer with the woodruff key, and carefully slide the balancer onto the crankshaft.
Step 6: Install the belts. Rotate or loosen the belt tensioner to reinstall the belt.
Note: Refer to your previous photograph or service manual to determine the correct belt routing.
Step 7: Lower and start the vehicle. Carefully remove the jackstands and lower the vehicle, starting the vehicle to ensure proper reassembly.
FAQ:
What is the first sign that a harmonic balancer might be bad?
Usually there would be belt noise on starting the engine. Other things cause that more commonly, but that’s one symptom where the harmonic balancer should be checked.
Can I drive if the harmonic balancer is failing?
Possibly, but the risk is that it could throw the serpentine belt off, which usually drives the water pump and power steering pump. In which case it would be difficult to drive and the engine would overheat fairly soon after.
How long does it take to replace a harmonic balancer?
On most engines, it takes a little over an hour.
How do you test a harmonic balancer?
Start your engine and check the harmonic balancer to see if it wobbles while the engine is running. Take a flashlight and shine it directly onto the balancer to see if it goes in and out while rotating. If it wobbles, the harmonic balancer is bad. Turn off the ignition.
Can I drive with a bad harmonic balancer?
It's not okay to drive with a bad harmonic balancer. The bouncing crankshaft will wear on the main bearings. It can also tear up drive belts and possibly come apart posing a danger to people and property.
| Item Specifics | |
|---|---|
| Brand : | vap-autoparts |
| Manufacturer Part Number : | VA104972TS |
| Overall Outside Diameter (mm) : | 168 |
| Crank Bore (mm) : | 28 |
| Overall Width (mm) : | 62.4 |
| Nose Outside Diameter (mm) : | 41 |
| Ring Width(in) : | 35.7 |
| Pulley 1 Number of Grooves : | 4 |
| Interchange Part Number : | 594-354 |
| OE/OEM Part Number : | 13810-P3F-003 |
| Superseded Part Number : | 13810P3F003 |
| Fitment Type : | Direct Replacement |
| Item Item Weight : | 8 LB |
| Package Quantity : | 1 |
| Connector Color : | Black |
| Bundle Description : | Harmonic Balancer Crankshaft Pulley |
| Vintage Car Part : | No |
| Performance Part : | Yes |
| Universal Fitment : | Yes |
| Items Included : | As picctures shown |
Shipping
1.Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available.
2.USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available.
3.We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received.
4.Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received.
5.Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more.
Warranty
1.The warranty terms only apply to all the auto parts purchased from VAP-AUTOPARTS.
2.VAP-AUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements.
3.VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues within 60 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests.
4.VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues after 60 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests.
5.VAP-AUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly.
Return
Feedback
We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction!As a seller Positive Feedback is very important to us, as well as ourcustomers. We hope that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Warning
Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.
Best Sales
Newly Listed
Terms & Contact Shipping Policy Payment Policy Return Policy FAQ About Us |
Harmonic Balancer For HONDA CR-V 2.0L 1972CC L4 DOHC 1997-2001 CrankShaft Pulley
Bad Harmonic Balancer :Signs to Watch Out For When this component fails, it can cause a range of issues. The most common symptoms of a bad harmonic balancer include:
Harmonic Balancer Replacement: Step 1: Prepare the vehicle. Jack the vehicle up high enough to obtain access to the harmonic balancer, located on the front of the motor and attached to the crankshaft
Step 2: Remove the accessory drive belts. On many modern vehicles, there is an automatic, spring-loaded belt tensioner that can be rotated to loosen the belt. You may need to use an open end wrench or ratchet handle, depending on the design. Older vehicles, and some newer ones, require you to loosen a mechanical tensioner. Note: Use your cell phone to take a picture of the belt routing for future reference.
Step 3: Remove the harmonic balancer bolt. Remove the harmonic balancer bolt by using the strap wrench to hold the balancer still.
Step 4: Remove the harmonic balancer unit. Using the gear puller, place the hooks in an area that will not easily break, like the lip of the pulley section. Note: Most harmonic balancers are kept from rotating on the crankshaft by using a woodruff key. Don’t lose the woodruff key; you will need it for reassembly.
Step 5: Install the new harmonic balancer. Align the woodruff key slot in the new balancer with the woodruff key, and carefully slide the balancer onto the crankshaft.
Step 6: Install the belts. Rotate or loosen the belt tensioner to reinstall the belt. Note: Refer to your previous photograph or service manual to determine the correct belt routing.
Step 7: Lower and start the vehicle. Carefully remove the jackstands and lower the vehicle, starting the vehicle to ensure proper reassembly.
FAQ: What is the first sign that a harmonic balancer might be bad? Usually there would be belt noise on starting the engine. Other things cause that more commonly, but that’s one symptom where the harmonic balancer should be checked.
Can I drive if the harmonic balancer is failing? Possibly, but the risk is that it could throw the serpentine belt off, which usually drives the water pump and power steering pump. In which case it would be difficult to drive and the engine would overheat fairly soon after.
How long does it take to replace a harmonic balancer? On most engines, it takes a little over an hour.
How do you test a harmonic balancer? Start your engine and check the harmonic balancer to see if it wobbles while the engine is running. Take a flashlight and shine it directly onto the balancer to see if it goes in and out while rotating. If it wobbles, the harmonic balancer is bad. Turn off the ignition.
Can I drive with a bad harmonic balancer? It's not okay to drive with a bad harmonic balancer. The bouncing crankshaft will wear on the main bearings. It can also tear up drive belts and possibly come apart posing a danger to people and property.
Shipping
1.Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available.
2.USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available.
3.We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received.
4.Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received.
5.Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Warranty
1.The warranty terms only apply to all the auto parts purchased from VAP-AUTOPARTS.
Return
We stand behind every product we sell. All of our brand new items come with a 30-Day money-back or exchange guarantee. Feedback
We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction!As a seller Positive Feedback is very important to us, as well as ourcustomers. We hope that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. Warning
Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time. Copyright of VAP-AUTOPARTS. All rights reserved. |
