boostprojects-header2

RockJock JL/JT Currectlync High Steer Steering Knuckles For JL/JT RJ-447100-101

Description

BRAND NEW IN BOX

Kit Fits:


*Fits all listed vehicles below, granted they retain the factory front differential, or any aftermarket differential that features factory spec. inner C-knuckles.
For JL Wrangler Unlimited (4-door)
For JL Wrangler JL (2-door)
For JT Gladiator

Notes:


For optimum performance of these knuckles, we recommend purchasing them in one of our kits that provide the balance of the components for ease of use. See: RJ-440000-101 and RJ-440001-101
These knuckles were designed in conjunction with and intended for use with our RJ-442100-101 steering system.
** These knuckles may or may not work with stock or other aftermarket tie rods and drag links - we have not done that testing!


DESCRIPTION:


The RockJock High Steer Knuckles for all JL Wrangler and JT Gladiator models are a game changer! Simply installing these knuckles raises your tie rod 2 3/4 in. and your drag link 2 1/2 in.!
These knuckles, for use on factory axles or axles that retain factory inner C-knuckles, are intended for use with our other high steer components, to give you a package that provides all the necessary components to accommodate the higher steering location, adjust all geometry points and allow you to easily install a hydraulic assist steering ram, or to reinstall your stabilizer shock!
Our knuckles are manufactured to greater than OEM standards in every way. Features include premium iron castings, gloss black finish and precise machining for a component that installs just like factory. Additionally, we've provided extra threaded steering stop bolt holes ahead of the axle to allow for a second set of stops to be added, giving you firm steering lock stops on both wheels at all times, easing strain on other components.
For best results, it is highly recommended that these knuckles be used in conjunction with one of our knuckle kits that include all of the other components to make this installation easy. Our RJ-440000-101 kit includes our forged, high articulation Drag Link, our 42mm chromoly Tie Rod, as well as the bracket and clamp kits to allow you to install a hydraulic assist steering ram. We also offer our RJ-440001-101 kit that includes the same Drag Link and Tie Rod, as well as the bracket and clamp kits to allow you to reinstall your steering stabilizer shock at a much higher, protected height.
Additionally, we recommend the use of our RJ-9120FJLF forged, organically shaped front trac bar, so that all components nest together for maximum up travel as engineered.


Kit Includes:

Left side high steer steering knuckle
Right side high steer steering knuckle


Fitment Specs.:

For use on any factory JL or JT front differential, or any aftermarket replacement axle that features factory specification inner C-knuckles
Retains factory unit bearings, axle shafts, ball joints, steering stop bolts & brakes with dust shields.
Intended to be used with a minimum of a 17 in. diameter wheel and up to a 6 in. wheel backspacing.
A minimum of a 2.2 in. bump stop extension is mandatory to keep components from crashing under full articulation range conditions. See our RJ-107101-101 adjustable front bump stop kit for an easy to use solution.

Part List:

High Steer Knuckle (LH)
High Steer Knuckle (RH)
10mm-1.5 x 30mm Button Head Allen Bolt:  RJ-501110-1
10mm-1.5 x 35mm Button Head Allen Bolt:  RJ-501110-3
10mm-1.5 Jam Nut (RH thread):  RJ-502110-1
Cotter Pin:  CE-98338A190

Ask us about saving money with our PACKAGE DEALS
CP Cometic ACL Ferrea and ARP KitsCustom Made Package Deals
AEM Package DealsPackage Deals
Ask us about combining purchases for package deal auctions
  • Pistons
  • Rods
  • Bearings
  • Head and Main Studs
  • and more...

Shipping

  • We ship via UPS/USPS/FEDEX/ONTRAC ground depending on the address of buyer unless instructed to do differently.
  • We also offer expedited shipping at an extra cost.
  • International shipping rate applies to addresses in all other locations
  • Custom/duty/brokerage fees, if any, on Canada and international orders are the responsibility of the buyer.
  • Item ships within one business day after the payment has cleared or same day if paid by 12pm PST unless additional handling stated. Item purchased is shipped from West or East Coast Warehouses of ours depending on availability.
  • There's a shipping surcharge for shipments going to USPS PO Boxes, AF/APO boxes and any address that is out of 48 lower states. Please contact prior to get a shipping quote.
  • We strive to ship your order in a prompt manner to meet the criteria for shipping time that we specify in the Item information.
  • Ebay Promotional Shipping is good for shipments going to 48 lower states only.
  • We offer a variety of shipping options based on what product you are purchasing and your desired time frame for delivery to meet the needs of all of our customers.
  • Shipping charges are non-refundable.
  • We will gladly combine shipping charges to one charged based on the total weight of the package.   ARDY

Payment & Return

  • We require that all payments be paid through PayPal. Your address must be confirmed. Buyers who pay with unconfirmed addresses will not be accepted. 
  • Per our return policy this item can be returned in 30 days, buyer is responsible for the return shipping, 20% restocking fee may apply.
  • International Buyers, please contact us before bidding to discuss the shipping cost.
  • We always look to satisfy our customers in whatever needs they may have. If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any question.

If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any question.