Stainless Steel Distillation Column with 2 x Settler and thermometer

Spiral Distilling Apparatus made of stainless steel

• Spiral cooler – distiller module made of stainless steel, installed at the top of the distillation column.
• Thanks to applying a spiral cooler the heat exchange surface is increased, which translates to quicker cooling and lower consumption of cooling water during the process.
• The condenser, installed in a simple pot-still system, will ensure obtaining exquisite liquor, also flavoured, either fruit-based or grain-based.
• The module will be perfect for building a distiller in the Cooling Management (CM) system, i.e. precise control over cooling, with application of reflux, cold fingers or rectification.

Sedimentation tank functions:

• Securing against penetration by foam or batch transfers from the tank to the distillate collected.
• Collecting heavier fractions that are undesirable in the final product.
• Sedimentation tanks also constitute a space where the repeated simple distillation takes place. Such a solution enables obtaining purer distillate, while at the same time reducing the water consumption in the cooler.

Set contains:

1) Stainless Steel Distilling Condenser

• Total length: 25cm (9.85 inch)
• Spiral length: 2mts (78.75 inch)
• Hose connection: Ø 8mm (0.3 inch) 

• Total length (including valve): 17cm (0.7 inch)
• Settler length: 10cm (0.4 inch)

3) Digital thermometer for distillation column -50°C to 300°C .

• Thermometer will help to separate methanol from ethanol.  To have ethanol distillation temperature MUST be between 78.3°C and 85 °C.

4) Valve

5) 8mm Nut with gasket