Thank you for stopping by!!!!!!!!!!
Description; Your are buying one set of QB2.5 T/B cam modules. On left hand bows the T / Top module will go on the bottom cam where on RH bows the T or Top module goes on the top cam and B on the bottom. There must be a draw stop installed on the bow's cam before drawing the bow or the bow will be damaged. The draw stop setting can be set a maximum of +/- 0.5 of an increment from the recommended draw stop setting if you can't get to your draw length by adding or subtracting 0.5 of an increment then a different module set is required. Adding or moving the draw stop 0.5 of an increment the let-off increases when subtracting or moving the draw stop to the short side the let-off decreases. Each module size will change the draw length +/- 0.5 of an inch. The count for the draw sop starts at the 1 side of the cam using the center of the screw as the reference.
The draw lengths for this module set then the draw stop setting are;
82 nd Airborne - 29" - 6.4 101 st Airborne - 30" - 6.2
You will receive one set of QB 2.5 modules as pictured.
Draw length request; If you would like me to recommend a module please email the following, Bow make, model, year, the draw length now, the draw length you would like, your module ID number and where the string post is set. I will also add the bow specs when I return the message if I have them.
Shipping; Please wait for a combined shipping invoice before you pay for multiple purchases, the shipping will be at a reduced rate.
Thank you for your interest and questions are welcomed?????????