DC12V 24V Automatic PWM PC CPU Fan Temperature Control Speed Controller 2-way 4A
Description:
100% Brand New and High Quality
This section governor (PWMTS06 type) using PWM modulation technology to achieve temperature control, according to the ambient temperature of the governor to control the fan speed, the higher the temperature, the faster the speed, the ambient temperature is below the set start temperature when the governor to control the fan stops running. Whether it is a 2-wire, 3-wire or 4-wire fan, whether PWM or brushless fans, as long as the fan voltage is within 24V, current less than 4A, the governor apply! Also can drive a plurality of fans.
Main features:
1. Wide voltage range, ultra-high-power, support for multiple voltage DC fan: 12V 24V.
2. Support 2/3/4-wire types of DC fan speed, users do not have to buy expensive 4-wire PWM fan speed automatic temperature control can be achieved.
3. PWM speed control using industrial-grade chips, inverter technology, stable performance, precise control, eliminating the need for large heat sink linear governor general, lower power consumption, higher efficiency and more economical installation space.
4. Dynamic LED indicator light, intuitive understanding of the real work of the state governor.
5. The device is mostly used SMD package, stable performance, small size, saving space.
6. The temperature sensor is connected with a cable in the form of mounting holes to facilitate detection of the temperature specified temperature point.
7. Fixed mode temperature and temperature of 30 degrees, the governor control fan start, 30 to 50 degrees fan speed linear increase, 50 degrees above the fan at full speed.
8. Adjustable mode start-up temperature range: 10 to 50 degrees, full speed range of 30 to 70 degrees (start and full-speed temperature difference of 20 degrees).
9. The temperature probe maximum use temperature of 110 degrees, more than this temperature, the probe will be damaged.
NO.1(Vin+): DC power supply positive terminal port
NO.2(Vin-): DC power supply negative terminal port
NO.3(F1+): First channel DC fan positive port
NO.4(F1-): First channel DC fan negative port
NO.5(F2+): Second channel DC fan positive port
NO.6(F2-): Second channel DC fan negative port
NO.7: The temperature sensor interface
NO.8: LED indicator for power, when this light is lit, the governor of the power system is working properly
NO.9: LED work lights, when the ambient temperature is below the start temperature, the light is extinguished state, said the governor this time off the fan power, when the ambient temperature is higher than the start temperature, the light starts to blink the flashing frequency becomes faster, the fan turn faster (also indicates the current detected temperature continues to rise), by flashing to steady, indicating that at this time the fan is working at full speed into the state, but also the high temperature warning!
NO.10: Mode switch, the switch is set to the F position, the drive is a fixed temperature mode, toggle the A position, the governor is at a temperature adjustable mode
NO.11: Temperature adjustment potentiometer, rotating the potentiometer can be set to a temperature range of the governor
NO.2(Vin-): DC power supply negative terminal port
NO.3(F1+): First channel DC fan positive port
NO.4(F1-): First channel DC fan negative port
NO.5(F2+): Second channel DC fan positive port
NO.6(F2-): Second channel DC fan negative port
NO.7: The temperature sensor interface
NO.8: LED indicator for power, when this light is lit, the governor of the power system is working properly
NO.9: LED work lights, when the ambient temperature is below the start temperature, the light is extinguished state, said the governor this time off the fan power, when the ambient temperature is higher than the start temperature, the light starts to blink the flashing frequency becomes faster, the fan turn faster (also indicates the current detected temperature continues to rise), by flashing to steady, indicating that at this time the fan is working at full speed into the state, but also the high temperature warning!
NO.10: Mode switch, the switch is set to the F position, the drive is a fixed temperature mode, toggle the A position, the governor is at a temperature adjustable mode
NO.11: Temperature adjustment potentiometer, rotating the potentiometer can be set to a temperature range of the governor
Product Dimensions: 55 * 35 * 20mm (Mounting M3)
Sensor cable length: 30cm
Sensor cable length: 30cm
Applications:
This section completely governor industrial-grade technology solutions for industrial environments.
1. The outdoor enclosure, saving cabinet fan noise
2. Saving room fan noise
3. Other thermostat fan speed applications
This section completely governor industrial-grade technology solutions for industrial environments.
1. The outdoor enclosure, saving cabinet fan noise
2. Saving room fan noise
3. Other thermostat fan speed applications
Instructions:
1. Follow the interface instructions to connect the power and fan cables.
2. Plug the temperature probe into the governor and fix the metal part of the probe to the heated area.
3. Turn the power on and the governor adjusts the fan speed based on the temperature detected by the temperature probe.
1. Follow the interface instructions to connect the power and fan cables.
2. Plug the temperature probe into the governor and fix the metal part of the probe to the heated area.
3. Turn the power on and the governor adjusts the fan speed based on the temperature detected by the temperature probe.
4. About the use of fixed mode and adjustable mode:
1): Fixed mode, the No. 10 switch to the F position, the governor temperature range is fixed to 30 low-speed start fan, 50-degree fan full-speed, then adjust No. 11 potentiometer useless.
2): Adjustable mode, start No. 10 to A position, when the governor temperature range by the No. 11 potentiometer settings. At the factory, potentiometer No. 11 has been adjusted to the minimum starting temperature position (10 degrees, the corresponding full-speed temperature is 30 degrees.) No. 11 potentiometer clockwise slow rotation, the governor temperature The range will slowly increase and the temperature of the governor will change to the highest range (50 to 70 degrees) after one revolution.
1): Fixed mode, the No. 10 switch to the F position, the governor temperature range is fixed to 30 low-speed start fan, 50-degree fan full-speed, then adjust No. 11 potentiometer useless.
2): Adjustable mode, start No. 10 to A position, when the governor temperature range by the No. 11 potentiometer settings. At the factory, potentiometer No. 11 has been adjusted to the minimum starting temperature position (10 degrees, the corresponding full-speed temperature is 30 degrees.) No. 11 potentiometer clockwise slow rotation, the governor temperature The range will slowly increase and the temperature of the governor will change to the highest range (50 to 70 degrees) after one revolution.
Package Included:
1x 4A PWM PC CPU Fan Temperature Control Speed Controller
1x 30CM Temperature probe
1x 4A PWM PC CPU Fan Temperature Control Speed Controller
1x 30CM Temperature probe
