GIGABYTE GA-F2A75M-HD2 AMD A75 USB 3.0 Socket FM2+ Micro ATX Motherboard 

100% working condition. 

Motherboard were removed from working desktop 

and has been fully tested in Diagnostic software

• CPU
  FM2+ Socket:
  

  1. AMD A series processors
  2. AMD Athlon™ series processors

  (Please refer "CPU Support List" for more information.)
• Chipset
  1. AMD A75
• Memory
  1. 2 x 1.5V DDR3 DIMM sockets supporting up to 64 GB of system memory
  * The maximum 64 GB of system memory can be supported using 16 GB (or above) memory modules.
  2. Dual channel memory architecture
  3. Support for DDR3 2400(OC)/2133/1866/1600/1333 MHz memory modules
  4. Support for AMD Memory Profile (AMP)/ Extreme Memory Profile (XMP) memory modules
• Onboard Graphics
  APU with integrated AMD Radeon™ HD 8000/7000 series graphics:
  * To use the onboard graphics ports, you must install an AMD APU with integrated graphics.

  1. 1 x D-Sub port, supporting a maximum resolution of 1920x1200
  2. 1 x DVI-D port, supporting a maximum resolution of 2560x1600
  
  
  3. 1 x HDMI port, supporting a maximum resolution of 4096x2160
  
  
  4. Maximum shared memory of 2 GB
• Audio
  1. Realtek® ALC887 codec
  2. High Definition Audio
  3. 2/4/5.1/7.1-channel
  * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
  
  4. Support for S/PDIF Out
• LAN
  1. Realtek® GbE LAN chip (10/100/1000 Mbit)
• Expansion Slots
  1. 1 x PCI Express x16 slot, running at x16
  (The PCI Express x16 slot conforms to PCI Express 3.0 standard.)
  * To support PCI Express 3.0, you must install an FM2+ APU.
  2. 1 x PCI Express x1 slot
  (The PCI Express x1 slot conforms to PCI Express 2.0 standard.)
  3. 1 x PCI slot
• Multi-Graphics Technology
  1. Support for AMD Dual Graphics technology
  * Only A series APUs support AMD Dual Graphics.
• Storage Interface
  Chipset:
  

  1. 4 x SATA 6Gb/s connectors
  2. Support for RAID 0, RAID 1, RAID 10, and JBOD
• USB
  Chipset:
  

  1. 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
  2. 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
• Internal I/O Connectors
  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 4 x SATA 6Gb/s connectors
  4. 1 x APU fan header
  5. 1 x system fan header
  6. 1 x front panel header
  7. 1 x front panel audio header
  8. 1 x S/PDIF Out header
  9. 1 x USB 3.0/2.0 header
  10. 2 x USB 2.0/1.1 headers
  11. 1 x serial port header
  12. 1 x Clear CMOS jumper
  13. 1 x chassis intrusion header
• Back Panel Connectors
  1. 1 x PS/2 keyboard/mouse port
  2. 1 x D-Sub port
  3. 1 x DVI-D port
  4. 1 x HDMI port
  5. 2 x USB 3.0/2.0 ports
  6. 2 x USB 2.0/1.1 ports
  7. 1 x RJ-45 port
  8. 3 x audio jacks (Line In/Line Out/Microphone)
• I/O Controller
  1. iTE® I/O Controller Chip
• H/W Monitoring
  1. System voltage detection
  2. APU/System temperature detection
  3. APU/System fan speed detection
  4. APU/System fan speed control
  * Whether the fan speed control function is supported will depend on the cooler you install.
• BIOS
  1. 2 x 64 Mbit flash
  2. Use of licensed AMI EFI BIOS
  3. Support for DualBIOS™
  4. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
• Unique Features
  1. Support for @BIOS
  2. Support for Q-Flash
  3. Support for Xpress Install
  4. Support for EasyTune
  * Available functions in EasyTune may differ by motherboard model.
  5. Support for Smart Recovery 2
  6. Support for ON/OFF Charge
• Bundled Software
  1. Norton® Internet Security (OEM version)
• Operating System
  
  

  
  
  1. Support for Windows Vista/XP 32-bit
  
  
• Form Factor
  1. Micro ATX Form Factor; 22.5cm x 17.4cm

Please make sure you buy the right CPU,

 MEMORY to ensure 100% compatibility your other hardware. 

If you Void sticker remove can not return.