Brand New OEM Replacement Ignition Coil For Yamaha ATV

Features and further details

 

• Introduction:
  
  The spark plug cap is removable, just twist it off and can be use on any other different degree spark plug caps.
  Primary resistance test, attach both positive multimeter lead and negative multimeter lead on the primary sides(input sides of the ignition coil).
  
  Secondary resistance test, negative lead on the output side(wire without the spark plug cap)
  and positive lead on the primary sides (both primary sides should get the same reading on the multimeter). 
  
  Now you can twist the spark plug cap(or your old cap) back on(tightly) to do the secondary resistance test again.
  
  It should add another 5-10k ohms to the reading.
  
  Some bikes need to modify the mount to attach this coil to the bike.

• Specifications:   

  90 Degree Elbow
  Voltage: 12 volts
  Mounting points (center to center): 60mm 
  Single Output
  One Pole(Not Two)
  Spark plug cap resistance: ≈4.96 KΩ
  Measuring 1PZ primary coil: ≈0.4~0.5Ω
  Measuring 1PZ secondary coil: ≈5.12 KΩ

• Fitment: 

  1987 Warrior 350 YFM350X
  1988 Warrior 350 YFM350X
  1989 Warrior 350 YFM350X
  1990 Warrior 350 YFM350X
  1991 Warrior 350 YFM350X
  1992 Warrior 350 YFM350X
  1993 Warrior 350 YFM350X
  1994 Warrior 350 YFM350X
  1995 Warrior 350 YFM350X
  1996 Warrior 350 YFM350X
  1997 Warrior 350 YFM350X
  1998 Warrior 350 YFM350X
  1999 Warrior 350 YFM350X
  2000 Warrior 350 YFM350X
  2001 Warrior 350 YFM350X
  2002 Warrior 350 YFM350X
  2003 Warrior 350 YFM350X
  2004 Warrior 350 YFM350X
  
  

• Note

  If Spark Plug Cap is defective or you needed a different degree Spark Plug Cap.
  Just twist it off and reuse your old Spark Plug Cap or any others! Thank you!
  

• Package Include: 
  

  1 x Ignition Coil