WELCOME !
REAR ABS RELUCTOR RING + ABS SENSOR
+ DRIVE SHAFT HUB NUT AND MICROFIBER TOWELS FOR:
- BMW E46 E81 E82 E87 E88 E90 E91 E92 E93
NEW, ALL YOU NEED, ONE PIECE RING - NOT WELDED !!!

THE SET INCLUDES:
- 1x ABS RING
Internal diameter: [mm]: 79
Outer diameter: [mm]: 83
Number of windows: 48
- 1x SHAFT NUT / HUB
Internal thread [mm]: M27 x 1.5
Surface: galvanized
- 1x ABS SENSOR
Length: 954 [mm]
Reinforced cable
- 2x MICROFIBER WIPES
Useful for assembly
FITS FOR:
- BMW 1 E88 [2007-2014]
- BMW 1 E87 [2003-2014]
- BMW 1 E82 [2007-2014]
- BMW 1 E81 [2006-2014]
- BMW 3 E93 [2006-2014]
- BMW 3 E92 [2005-2014]
- BMW 3 E90 [2004-2014]
- BMW 3 E46 [2000-2006]
(DOES NOT FIT FOR M3 MODELS)
OE:
33217504521 ; 33217504522 ; 33217504523 ; 33217530964 ; 33217530965 ; 34526762466 ; 34526762466 ; 0986594514 ; 6762466 ; 33410412955 ; 33411133785 ; 6111507 ; 910900 ; 3890301 ; 502561 ; 832053 ; 12181 ; 33217540115 ; 33217540116 ; 33217547069 ; 33217547070
FITTING POSITION: REAR LEFT OR RIGHT WHEEL
In our experience, most ABS faults are caused by a combination of an ABS ring fault with an ABS sensor fault.
We often see a customer returning to buying an ABS sensor after purchasing the ABS ring a week in advance. If there is contact between two ABS components, it is very likely that both will need to be replaced.
Therefore, we always recommend replacing both the ABS rings and the ABS sensors. In addition, we provide you with an ABS hub nut and two microfiber towels that will be useful during assembly!
Best practice - match it, forget it and save money!
In our experience, most ABS faults are caused by a combination of an ABS ring fault with an ABS sensor fault.
We often see a customer returning to buying an ABS sensor after purchasing the ABS ring a week in advance. If there is contact between two ABS components, it is very likely that both will need to be replaced.
Therefore, we always recommend replacing both the ABS rings and the ABS sensors. In addition, we provide you with an ABS hub nut, and two microfiber towels that will be useful during assembly!
(You buy the product presented in the pictures - real photos)




All our rings are precisely designed using the highest quality materials.
Our unique PRO-COAT V3 coating technology has been proven to withstand over 100 hours of intense salt spray testing!
The
rings are produced in one piece - NO COMPROMISE. One piece production
is expensive but absolutely essential! Cheap, welded ABS rings will
crack and need to be replaced!
Malfunction with your ABS?
If your vehicle experiences any of the following symptoms, we recommend that you check the ABS rings and test the ABS sensors
SYMPTOMS:
Front-wheel drive vehicles:
1) The brake pedal vibrates at low speed
2) ABS light can be switched on
Rear-wheel drive vehicles:
1) ABS light can be switched on
2) Brake warning light is on
3) The traction control warning lamp is on
4) Possible vehicle in safe mode
5) It is possible that the vehicle is stuck in low gear
CAUSES:
- Broken ABS ring
- Swollen ABS ring
- Corroded ABS ring
- ABS ring teeth missing
- ABS ring impact with ABS sensor
- Defective ABS sensor
OUR SET IS ALL IN ONE - HIGHEST QUALITY !!!

BRAND NEW PRODUCT !!!
HERE, YOU SEE WHAT YOU ARE BUYING !!!
IT WON'T GET ANY CHEAPER !!!