eBay

FPV Super Pursuit 2005 Review | CarsGuide

Image result for walbro performance fuel pumps

DuPont Sustainable Sourcing Goals 2020 – Bioplastics News

GENUINE WALBRO GSS352, 350LPH MADE IN THE USA.

Amazon.com: Walbro TI AUTOMOTIVE GSS352G3 GSS352 Intank fuel pump 350LPH HIGH PRESSURE UNIVERSAL: Automotive

TI Automotive GSS352G3 High Performance Fuel Pump Flow Rates

UP FOR SALE IS OUR SNIPER-PERFORMANCE & WALBRO CUSTOM BUILT FUEL PUMP ASSEMBLY TO SUIT FALCON UTE BF BUILT AFTER 09-2007 AND ALL FG FGX UTES.

THIS ASSEMBLY ONLY SUITS PUMP FUEL (PERTOL) WITH THE GSS352 & NOT SUITED FOR E85 ORE METHANOL.

THIS ASSEMBLY IS CUSTOM MADE BY SNIPER PERFORMANCE AND FITTED WITH A GENUINE WALBRO GSS352 350-LPH AT 43.3-PSI 3-BAR 12.5v AND CAN SUPPORT UP TO 670-BHP BUT PLEASE CHECK WITH YOUR TUNER FOR CORRECT FITMENT.

OUR ASSEMBLY IS CUSTOM MADE TO STOP SURGING UNDER EXTREME TAKE OFFS AND AROUND CORNERS WHICH IS A COMMON PROBLEM WITH THE FACTORY SWIRL POD.

THIS WILL STOP THE SURGING PROBLEM BY 100%.

IT HAS BEEN DYNO & RACE TRACK TESTED, 1/4 MILE, CIRCUIT AND DRIFT.

THIS ASSEMBLY CONSIST OF ONLY THE BEST OF THE BEST PARTS AVAILABLE AND HAND ASSEMBLED IN MELBOURNE. THE ASSEMBLY IS MADE OF THE BEST POLLIMER AVALABLE (DUPONT GERMANY) AND ITS E85 & METHANOL APPROVED.

WE ARE THE ONLY ONES THAT OFFER THIS REVISED ASSEMBLY AND WITH A SPECIAL CLIP LOCK PUMP RETANER THAT MOUNTS THE PUMP 10mm ABOVE THE BOTTOM OF THE SWIRL POD THIS KEEPS THE FILTER-STRAINER CLEAN AND ALLOWS THE PUMP ITS FULL POWER POTENTIAL. ALSO KEEPS THE PUMP QUIETER WITH NO CHANCE OF MOVING AROUND OR COMING LOOSE ORE VIBRATING.

THE HOSES ARE RATED AT TWICE THE BURST PRESSURE OF THE FACTORY HOSES AND ARE HIGH FLOWING.

FITTED WITH ONE PIECE WIRING LOOM DELPHI TO WALBRO WITH STAINLESS STEEL BRAID & TERMINALS.

STAINLESS STEEL COMPRESSION SPRING, HOSE CLAMP & GUIDE PINS FITTED FOR NO CHANCE OF CORROSION.

HIGH MICRON HIGH FLOW NYLON STRAINER.

HIGH FLOW MODIFIED FUEL RETURN VALVE TO KEEP THE RETURN PRESSURE LOW AND TO FILL THE SWIRL POD IN HALF THE NORMAL TIME IT WOULD USALY TAKE.

Will suit ALL the following vehicles:

Make	Model	Series	Engine	Date
Ford Ford	Falcon Falcon	BF XT	4.0L I6 4.0L I6	BUILT AFTER 9/2007
Ford	Falcon FG UTE	G6 & G6E	4.0L I6	2008-current
Ford	Falcon FG UTE	XR6	4.0L I6	2008-current
Ford	Falcon FG UTE	XR6 Turbo, G6E Turbo	4.0L I6 Turbo	2008-current
Ford	Falcon FG UTE	XR8	5.4L V8	2008-current

SPECIFICATIONS.

FUEL PUMP PART NUMBER: WALBRO GSS352.

PRESSURE AND FLOW RATE: 350-LPH AT 3-BAR 43.3-PSI 12.5-V supports up to 670-BHP.

ASSEMBLY PART NUMBER: Sniper Performance MOD-043-3 UTE.

ASSEMBLY HEIGHT: Base to flange 405-mm compressed 355-mm.

ASSEMBLY CAPACITY: POD 1-litre.

ASSEMBLY HOSE FITTINGS: Left Returnee (8-mm c-lock). Centre blocked. Right (10-mm c-lock) Fuel out.

WIARING HARNEST: One piece wiring loom Delphi to Walbro with stainless steel braid & terminals .

PRESSURE HOSES: High pressure, high burst, high flow white & black submersible fuel hose made in the EU, 155mm long.

FUEL GAUGE READINGS. Full up 50-ohms -+5. Empty down 990-ohms -+5.

The Walbro GSS352 350LPH high flow in-tank fuel pump is one off the most common pumps on the market because its the best pump for its size. Walbro designed the pump to meet the requirements of modern turbocharged applications. The turbine design lends itself to extremely quiet operation and a massive flow rate.

WE CAN ALSO SUPPLY THIS ASSEMBLY WITH THE WALBRO GSS341 255-LPH, PUMP FUEL & THE WALBRO TIA485-2 750+BHP 460LPH E85 PUMP. AND THE F90000285 525-LPH E85. MESSAGE US FOR A PRICE $$$. ALL CUSTOM APPLICATIONS WILLING AND ABLE TO BUILD.

COMES FULLY ASSEMBELD WITH ALL E85 APROUVED PARTS FITTED READY TO DROP IN.

We also sell performance and standard fuel pumps, Injectors VDO & Bosch 280cc to 2400cc, Sniper Performance Coils, Garret Turbo, Turbosmart Full Range, Vic agent for AeroFlow fittings & hoses, Crow Cams, APR bolts, K&N Air Filters, NOS Kits & Filling, Auto Meter, Intercoolers, Custom Piping, Center Line & Weld Racing Wheels, Mickie Thompson Race Tyres, Red Line Oils and many more.

Message us with your details and we will get back to you ASAP.

WE ALSO HAVE IN OUR STORE FOR SALE IS OUR NEW PRODUCT.

YEARS IN DEVELOPMENT AND WITH EXTENSIVE VEHICLE AND DYNO TESTING, MADE IN JAPAN WITH AIRCRAFT GRADE ELECTRONICS. AND SUPPLIED WITH VDO SILICON GREASE.

SET OF 6 PERFORMANCE IGNITION COILS TO SUIT FALCON XR6 TURBO FG FGX & TERRITORY TURBO MODELS. WE ARE SO CONFIDENT OF THIS PRODUCT IF YOU ARE NOT 100% SATISFIED WE OFFER A FULL MONEY BACK GUARANTY.

Our coils connect directly to the factory connectors. Once installed, you’ll have the power and performance of a higher energy spark with 15% more spark and multiple spark discharge.

Increased spark KV'S and voltage along with multiple spark capabilities, the time it takes to fire once it gets the signal is one Millisecond which is five times quicker than standard. That helps improve the combustion process of the fuel mixture to create an efficient burn.

Perfect spark from 500 rpm to 12,000 rpm This results in improved throttle response.

Stops Pre-Ignition and Pinning when used

with E85 applications.

Smooth idle and quick starts, plus increased hard acceleration and high rpm without misfiring.

SNIPER HI PERFORMANCE!

MISFIRING PROBLEMS

SOLVED EASY!!!

Made in Japan with a 2 year

Warranty $210.00 a set of 6.

For General Enquires :Customer Support ,technical support and bookings & pickups we are located at 45 Charles street north Coburg Melbourne Victoria 3058. Always best to call first.

Contact through EBay message leave us your details and we will get back to you ASAP.

Warranty

12 Months or 20,000 km Warranty on Passenger Vehicles.
Payment
We accept : Pay on Pickup, PayPal, Bank Transaction, credit card over the phone from 9 to 5 mon to fri & Money Order as payment methods. Please use your EBay Username as a transaction reference.
Postage  Local Pickup (message us for address and pick up times)
Domestic :  Fixed Rate we use Couriers please, Fastway, Australia Post (Regular Post) and express. please contact us of which you prefer on purchase in order details ore if not we will post out with the one we think would be the best to use.
International : POA , Please contact us via EBay for a quote.
All items sent with tracking no and insurance except when sent with Australia post which is only covered for $50.00 for lost ore damaged in transit.
Fitting services   Available in our modern and well equipt work shop.

For General Enquires :Customer Support ,technical support and bookings & pickups we are located at 45 Charles street north Coburg Melbourne Victoria 3058. Always best to call first.
      Contact through EBay message leave us your details and we will get back to you ASAP. PH; 04., 17., 303., 775.