eBay

Item Description

Countersunk Sleeve Anchor Class 5.8 Zinc Yellow is a strong and economical expansion anchor which is easy to install and remove. This sleeve anchor features a countersunk head providing a discrete countersunk finish. It is the most cost effective and most common of all of our mansory anchors and can be used for most applications in concrete, masonry, solid brick or concrete block
Features / Benefits: Pre-assembled for fast and simple installation without the need for setting out, Ideal for through fastening applications
Material / Coating: Zinc Yellow plated refers to the colour of the chromate that is applied after zinc has been applied. Yellow chromate increases the overall protection of the finish and is the preferred plating finish for most construction fasteners due to the good level of protection against corrosion. It can be used externally but doesnt offer the same protection as Galvanised or Stainless
Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw, bolt, or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
Buy with confidence: ⇒ 8+ years experience selling online, > 15,000 stock lines, > 40 million pieces ex stock in Brisbane QLD
Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
Need help? Message us through eBay

Specification
Product	Sleeve Anchors
Applications	Concrete, Solid Masonry and Stone
Head Type	Countersunk
Industry Size	10mm x 120mm
Thread Size	M8
Hole Depth APPROX	75mm
Max. Fast. Thickness APPROX	50mm
Hole / Drill Diameter Size APPROX	10mm
Material	Carbon Steel
Grade	5.8
Finish	Zinc Yellow / Passivate
Brand - Our Discretion	Bremick / Hobson
This Pack Quantity	5