• IDEAL for gluing anything that may flex & bend !
• Foam-safe FOAM-TAC bonds DepronTM, EPP, BlueCorTM, StyrofoamTM (EPS), Fan-Fold,  Florist's Foam, XPS, EPO, CELLFOAMTM and many other types of foam as well as carbon fiber, balsa wood, plywood, shoes, and many plastics
• Excellent for building or repairing anything made out of foam - like "foamie" remote control model airplanes for example.
• Will not attack, melt or dissolve foams - holds quickly and cleanly. The strong bond is like welding the foam parts together.
• Remains permanently flexible once dry, never hard or brittle.
• NOT a Cyanoacrylate (CA). No activator needed! No mixing, very low odor, no fumes
• Does not leave any residue on surfaces.  No white haze.
• Effective on many kinds of items - stick together anything that "flexes". 
• Requires much less glue for a permanent bond than cyanoacrylate foam-safe glue. A little goes a long way. 
• Won’t glue fingers together - no debonder needed, it simply rubs off your fingers. 
• Dries fast and clear, at about 1/3 the original weight.
  
• Convenient Tube  - for your drawer or toolbox
• Long Shelf life (when tightly capped, this is important!).  
  
• Improved formula with UV blockers won't yellow or brown. It stays clear.
• Does not expand or foam-up while drying.

Ideal for making an invisible "living hinge" - reattach broken ailerons or control surfaces on your model plane.  Also repairs motor mounts, control horns and pushrods, mounts servos, tack down wires. Or, fix your shoes or anything else around the house!

• Waterproof. 
• Brand New / Fresh / Sealed on blister card.

 HELPFUL HINTS FOR USING FOAM-TAC 

• ALWAYS test on scrap materials first to ensure compatibility.
• Surfaces must be clean, dry, and free of dust and grease.
• LESS is MORE!  Spread thin amount of glue evenly on both sides of material to be bonded.
• Immediately press surfaces firmly together, then pull apart and hold separate for 5-10 seconds, repeat, then press back together.
• Will hold in a few minutes - will be dry in 20-30 minutes, and maximum strength is achieved within 24 hours or less.
• IMPORTANT: Always screw on the cap securely after each use to prevent product evaporation. Does NOT require refrigeration, just keep tightly sealed.
• Do not use near any open flame or ignition source.
• Avoid  prolonged breathing of vapors.
• Keep out of reach of children

Beacon's Foam-Tac website has several demonstrations of how well Foam-Tac works and what it can do. Check it out! (copy and paste this link):   HTTPS://www.foam-tac.com/foam-tac-demos.html#.U9fwuep0wdU