• HIGH QUALITY, DURABLE Diamond Coated Holesaw Tool 7 inches Diameter, PROFESSIONAL Quality Tool for Drilling Holes in Tiles, Glass, Fish Tanks, Marble, Granite Ceramic, Porcelain
• Toilet hole cutout through porcelain tiles. STANDARD 3/8 inch Shank Use with standard electric or cordless drill.
• RARE SIZE - ACTUAL hole diameter may be slightly larger than 7 inches depending on material removed.
• SAVE OVER 80 Percent for DIY Kitchen, Bathroom, Shower, Faucet Installation Projects
• Use water as coolant to prolong the tool life, use a wood guide these tools do not need a center pilot drill. DRILAX Quality - We are here to help.
• Use with Any Electric Drill - Diamond Circular Hole Saw for Floor Drain, Shower, Shower Mixing Valve, Shower Drain Installation
• Drills 1-1/8 inch deep - Wet Type - Do not use dry - No Pilot Drill Bit - Pilots are not required
• Shank 3/8" - No Need for Adapters or Arbor

Large Size - Great Value

This Tool Does NOT Have Center Pilot Drill

Do NOT Use Dry

3/8 inch Shank Size

Can be used with Handheld or Upright Drillers

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 " in depth.

Shank size is 3/8" - common electric or rechargeable drillers can be used.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

DRILAX Diamond Hole Saw