Pump Head Kit - 2400-2700 PSI Honda GCV 160 SRMW2.2G26 RMW2.2G24 Pressure Washer

US Warehouse - FREE Shipping in USA


Description



Works on Brute 2600. To replace the broken head 92840020, When moving the Unload Valve from the broken head to the new one you need to get the valve seat out of the broken head also. The new head does not come with the valve seat in it. Two tricks to getting this out: 1-the valve seat is threaded so if you find the correct bolt to thread in just pull it out that way, 2) take a cutting wheel on your grinder and cut off the tube that has the seat in it so you can pound it out with a punch, you just need to cut it off to get at it from the other side. Once seat is out, tap it into the new head and insert your Unload Valve.

  • This kit includes: Seals Valves Chemical injector E-Z start valve Thermal, inlet or outlet tubes
  • This is the head from the SRMW2.2G26, which is rated at 2.3@ 2,700
  • also known as 2849008, 2840020, 2840021, 2840860, 2840660
  • Simply replace the head and swap over the unloader and you are ready to wash!
SRMW2.2G26 & RMW2.2G24 UPGRADE Pump Head Kit Replacement Pump Head Sold As Shown Fits the following models RMV2.5G24 RMW2G24 RMW2.2G24 RMW2.2G24-EZ RMW2.2G24-EZ-SX SRMW2.2G26 This is the head from the SRMW2.2G26, which is rated at 2.3@ 2,700. The new design allows for more PSI and higher GPM, which also solves the pressure problem of the earlier model also known as 2849008, 2840020, 2840021, 2840860, 2840660 Simply replace the head and swap over the unloader and you are ready to wash! This kit includes: Seals Valves Chemical injector E-Z start valve Thermal, inlet or outlet tubes This manifold will fit many pressure washer brands: COLEMAN TROY-BILT GENERAC EXCELL DeVILBISS POWERMATE BRIGGS & STRATTON BRUTE SPEED CLEAN SEARS CRAFTSMAN CLEAN SHOT AND MANY OTHERS Need parts for PRESSURE WASHERS? AIR COMPRESSORS? GENERATORS? Questions? Contact us with your model number! GENERAC DeVILBISS DELTA CAMPBELL HAUSFELD MI-T-M EXCELL CHORE MASTER COLEMAN TROY-BILT SPEED CLEAN FAIP RYOBI HONDA BRIGGS & STRATTON AND MANY OTHERS

Known to fit
020486 Troy bilt pressure washer
briggs and stratton 020474 with honda motor; 160 5.5 hp 2.3 gpm 2600 psi pressure 
srmv 2.2g26 generac pressure washer
Briggs and Stratton 020429 with 2700psi
Craftman 580-752501 rear dispensing pressure washer
Brute 2800 model # 020629 with Honda GCV 160 engine
Generac Model #0059870 -- It will only fit if you have the pump with the all aluminum pump head. If you have the version with a brass pump head it will not fit. The brass version has a longer piston stroke and more water seals.



NOTE: Please feel free to contact us if you have any questions.


Shipping & Handling


Free 2 Day Shipping! 
100% Satisfaction and Money-Back Guarantee! We accept return within 30 days!

Most orders are shipped within one business day with standard shipping and tracking number. Tracking information will be automatically uploaded as soon as the item has been shipped. As a postal service there might be used USPS, UPS or other one.

Please make sure to provide the correct shipping address during checkout as the address cannot be changed after checkout. We are not responsible for any incorrect or undeliverable addresses. 

We do not ship to AK, HI, PO boxes, or APO addresses.



Return Policy

A) 30 days return. 100% Satisfaction Guarantee

  • In case the product arrives damaged or there are any errors in the shipping (e.g wrong item or size), you will not be responsible for the return cost. We will provide you with prepaid pickup labels or Return of Merchandise Authorization code (RMA) along with the detailed instructions. For any other reasons, you may be responsible for partial or full return shipping fee. Important Note: Replacements or refunds will NOT be provided until we have received the returned merchandise, with the exception of cases which returns are not required.

B) General Return Information
  • If you would like to return your purchased merchandises, please kindly contact us via eBay message by choosing “I have a question about using my item or I want to send the seller a message.” as the topic. We will provide you with the return shipping label with the tracking number to your PayPal email address and the return address confirmation to your eBay message. The location of the warehouse responsible for the return will be determined by the fulfillment service department. Once the item has been received by our warehouses and we can confirm from the tracking number that the item has been delivered, we will issue you the refund for the purchase. You have 30 days grace period after the delivery of the item to complete the return.

C) Return Shipping Costs

  • We will be responsible for return shipping costs (if any) if the merchandise received is either not as described or damaged in any ways.
  • As for returns due to any other reasons, such as change of mind, mistaken purchases, or buyer’s remorse, you will be responsible for the round trip shipping costs. Restocking fees may also apply at our discretion.
  • Please note that our product specialist will be checking all products returned to the warehouse to confirm if the item has had any defects. Please note that the Buyer will Pay for return shipping if the item received, checked and confirmed by product specialist states there is no defect in the product.

D) Return Locations

  • Please be informed that our products are being stored and fulfilled by third party warehouses and manufacturers throughout the United States (also known as third party fulfillment or product sourcing). Therefore, the most appropriate return location will be determined by the respective warehouses or manufacturers, depending on your location and product types. Please note that the return shipping location may differ from the return address stored on eBay. Please refer to the return instructions and follow them accordingly to ensure successful return processes.



!!! Thank you very much !!!