LinkTap watering devices offer 7 versatile modes: Instant, Interval, 7-Day, Odd-Even, Calendar, Month, and Master Valve — all supporting “Watering by Duration or Volume”. With up to 100 watering cycles per day, from 3 seconds to 24 hours per cycle, they can handle almost any watering requirement.

For advanced control, features like ECO mode and batch watering simplify even the most complex watering schedules.

When a fault is detected, the LinkTap system sends real-time push notifications to your phone and emails to your registered address and up to two others (e.g., neighbors, friends). If you can't respond quickly, your designated contacts will be alerted and can assist. In case of pipe leaks, the system can automatically shut off the water when an unusually high flow is detected.

Rain Skip checks local weather just before a watering cycle starts. If observed and forecasted rainfall meets your set threshold, the cycle is skipped automatically.

Unlike traditional rain sensors that only react after it rains, Rain Skip checks weather forecasts and past rainfall to skip watering both before and after the rain—saving thousands of liters of water. Best of all, it’s FREE!

Hot or cold days, LinkTap has you covered. By checking local weather data, it automatically adjusts your watering schedule to ensure plants get just the right amount of water, no matter the temperature.

Enjoy uninterrupted watering with LinkTap water timers. Designed for efficiency, they offer an extended battery life, reducing the need for frequent replacements and ensuring reliable operation season after season.

If a power and/or network outage occurs, any watering in progress will end as usual, and subsequent watering will still take place as scheduled.

In addition, the device continuously monitors its battery level. If the battery runs low, it will automatically shut off the valve to prevent water waste and ensure safety.

LinkTap products use powerful Zigbee technology to provide better wireless coverage than standard Wi-Fi tap timers. Need even greater range? The LinkTap Extender effortlessly expands your system, creating a reliable mesh network that keeps your garden connected, no matter the size or layout.

View and download detailed watering history from the past 90 days with a single click in the app.

Automatically prevents freezing by releasing water when temperatures drop below a preset threshold. With its built-in temperature sensor, the water timer detects sudden cold spells and flushes water to reduce the risk of freezing, preventing costly device damage — no need to worry about unexpected frost.

Get notified before freezing temperatures arrive! LinkTap water timers use real-time temperature monitoring and weather forecasts to provide early warnings, giving you enough time to winterise and protect your irrigation system.

Tens of thousands of happy users have confirmed that setting up a LinkTap system is quick and hassle-free. Just plug the gateway into your router, scan the hardwares’ QR code in the app, and you’re good to go!

Start or stop watering anytime using the device’s button. Enjoy enhanced security with three-level lockout settings managed through the app, plus a configurable auto shut-off for added peace of mind.

Receive real-time push notifications and/or emails on your phone whenever one of the following events occurs:

• Water timer detaches from the faucet
• Valve fails to open or close properly
• Mains water supply is cut off or faucet is turned off
• Flow rate exceeds or drops below a user-defined threshold
• A programmed or manual watering cycle starts or ends
• Watering is skipped due to rain or low temperature
• Manual On/Off button on the device is pressed
• Gateway, extender, or water timer goes offline
• Battery level drops below certain thresholds
• Freezing temperatures are approaching

With a UV-resistant exterior and IP66 waterproof rating, LinkTap water timers are built to endure harsh weather conditions. They can even be mounted upside down while maintaining full functionality and waterproof performance.

Control up to 15 LinkTap watering devices (any model combination) with a single Gateway, and manage up to 20 Gateways from one user account. These Gateways can be deployed at the same location or across multiple locations worldwide.

As the owner of a LinkTap system, you can invite up to six people (e.g., family members, neighbors, or your gardener) to control your devices, adjust their permissions, and manage your system remotely — all through the LinkTap app.

For landscape professionals, the free and powerful LinkTap app makes it easy to manage multiple clients’ systems from a phone, tablet, or computer — anytime, anywhere.

Control your watering effortlessly with Alexa voice commands for ultimate convenience. LinkTap also supports Home Assistant through MQTT, cloud, and local APIs, ensuring smooth integration into your smart home ecosystem.

The built-in Device Health Check tool lets you effortlessly track your LinkTap devices' connection status, signal strength, and battery level over the past 14 days. Gain valuable insights into your system’s performance, all with the LinkTap app.

Filling swimming pools, cooling outdoor spaces, reducing damage from bushfires, and deterring animals, the LinkTap system provides convenience and peace of mind for homeowners.

The multilingual LinkTap App (English, Español, Deutsch, Français, Italiano, 日本語, 中文) lets you control your LinkTap devices easily from your Android phone/tablet, iPhone, iPad, or any computer — anytime, anywhere. Combining ease of use with advanced functionality, it provides all the features needed for a seamless smart watering experience.