This is a wire harness for the Volvo electric power steering pumps used in various 2005-2013 Volvo cars. This harness uses factory-style connectors sourced from the factory supplier. The wire is automotive-grade GXL insulated wire rated for under hood use. The harness comes with 10 feet of wire. All wire connections are crimped. All our products are assembled by hand in the United States. All crimps are verified to meet USCAR standards for tensile strength. Watch out for other companies selling harnesses made from cheap aftermarket connectors. These cheap kits often don't even use the correct seals or connectors. Note that some 2011-2013 Volvo models use a different pump that requires different connectors.

The main power connector in this kit is an alternate assembly made by the original manufacturer to replace original connector 3M5T-14A464-NBC. It has a pink lock instead of the original blue part but otherwise fits identically. It has 10 feet of 8-gauge, red and black wire to match the factory wiring used on Volvo's wiring harness.

The smaller data connector comes with:

• 10 feet of gray 18-gauge wire with a yellow stripe for switched power
• 10 feet of gray 18-gauge wire with a red stripe and 10 feet of blue 18-gauge wire with a red stripe for the CAN BUS wires.

These colors match the factory connector I have on hand.

Custom harnesses (length, wire color) can be made. Message me for prices and lead times. Custom harnesses are not returnable.

This kit can be used to replace damaged wiring in factory Volvo cars. It may also fit some European Fords of a similar era, but I don't have definitive data to say which.

The factory pump part number this matches should be 4N513K514. Please check out the picture of the Type 1 vs. Type 2 connectors on the pump to make sure this one will fit. There are two versions of the main power connector. This is the smooth squared one. If yours is slightly oval and has alignment tabs, this will not fit.

A wire harness for the alternate (more common) connector is here:

https://www.ebay.com/itm/264419253643  

This kit can also be used to install a Volvo electric power steering pump in hot rods, customs, or other performance vehicles. The Volvo electric power steering pump is a popular swap part for the performance minded car enthusiast. With this kit you aren't limited to cutting up and splicing junkyard wire looms or buying the factory replacement loom (which only includes the power connector).

There is good info out there on Volvo, electric car, and Grassroots Motorsports forums if you Google it, but eBay won't let me put links here.

The pump pictured is for illustrative purposes only. Please note that this is a universal kit for the Volvo pump using factory-sized wiring. It is assumed that the purchaser and installer are familiar with automotive wiring and will follow standard industry practices.

This pump will run with just switched power to the grey/yellow wire. There are many companies that now offer CAN BUS controllers to let you adjust the pump output.

If you prefer to buy just the connectors and the wire terminals, please see my other ad:

https://www.ebay.com/itm/264535871022  

NOTE: This item is for the mid-2000s electric hydraulic pump if you are looking for the later model fully electric power steering rack parts see my other ads.

If you are looking at electric power steering pumps and the Volvo pumps won't fit or aren't available, check out the Mazda, Nissan, and Mopar pumps. These pumps require a controller available in our store but are often cheaper and more available. The Mopar and Nissan pumps are also horizontal so they can often fit in areas the vertical Volvo and Mazda pumps will not. We sell connector kits for all the above-mentioned pumps.

If you are looking for a steering connector and you don't see it, feel free to message me.