May you Like
160AMP, 200AMP MIG/MAG/FLUX/LIFT TIG/MMA 5 IN 1 DC INVERTER WELDER
DESCRIPTION
ANDELI MIG-160, MIG-200 are the quality DIGI synergic multi-process gas/gasless welding machines with compact portable design. They are easy to use and perform great, so they are the perfect equipment for garages, farms, mobile technicians, DIY and other repair services.
FEATURES
- MIG/MAG/FLUX/LIFT TIG/ MMA(ARC/STICK) DC Inverter welder 5 IN 1
- DIGI Synergic System control: the current, voltage and feeding speed can be synchronously changing to correctly get matching each other so very easy to use.
- Variable Voltage Control - Gives precise adjustment of output voltage to give control of heat input
- Stable wire speed, power saving, no electromagnetic noise
- Full protections: over current protection, over heat protection and over load protection
- Reverse Polarity Facility (Gasless) - Allows use of self shielding flux cored wires for outdoor applications
- Feed wire speed can be adjustable
- Wire diameter size range: 0.6/0.8/1.0(mm)
- Fitted feed roller size: 0.6/0.8(mm) on MIG-160, 0.8/1.0(mm) on MIG-200
- Wire reel size can be up to 5kg
- Soft start - When MIG welding wire only feeds slowly until the welding arc has been established
- Comes with a 2m 14AK fixed MIG torch for MIG-160, a 3m 15AK Euro Standard Connector quality MIG torch for MIG-200
- Dinse Plug Size: 10-25
- TIG arc start method: Lift (Please note the TIG function is lift arc start, not High Frequency ignition arc start)
- AUTO ARC FORCE, HOT START and No stick technology
- Usable electrode 1.6 - 3.2mm for MMA welding on MIG-160, 1.6 - 4.0mm for MMA welding on MIG-200
- IGBT technology inverter - more efficient and easier to use than a transformer or MOSFET
- LED digital displays
- CE approved
- Wired with a 3 pin 13amp UK standard plug
- Compact portable design and light weight
- Provides smooth low splatter welds on all steels due to its inverter technology
- These welders are not suitable for welding aluminium and aluminium alloys
Specification of Argon Gas Regulator
- Material: Metal.
- Applicable Gas: Argon gas.
- Input Pressure: </=14.7MPa (150kgf/cm²).
- Output Pressure: 0.25MPa+/-0.05MPa (2.5+/-0.5kgf/cm²).
- Output Flowing rate: 0~25 L/min.
- Inlet Female Thread: G5/8-14.
- Outlet Thread: M12x1.
- Please carefully check this regulator photo and specification to make sure it can fit your gas bottle cylinder before adding it to your order as Not this regulator can fit all types of gas bottle cylinders.
- Model: WP-17V Valved TIG Torch
- Power Plug Dinse Size: 10/25
- Gas hose copper nut size: 3/8" BSP
- Torch Length: 3M
- Gas control: Turn on/off the valve on the torch neck
- Suitable for Lift ARC start TIG welding (not suitable for HF ARC start TIG welding)
- Comes with 3 x Ceramic Cups 4/5/6, 3 x Collets 1.6/2.0/2.4mm, 1 x Collet Body 2.4mm, 1 x Long Back Cap, 1 x Short Back Cap
SPECIFICATION
| Brand | ANDELI |
| Power Supply | AC220V+/-15% Single phase (50-60Hz) |
| Rated Input Capacity(KVA) | 7 on MIG-160, 9 on MIG-200 |
| No-load Voltage (V) | 56+/-5 |
| Welding Current Range (AMP) | 30-160 (MIG-160), 30-200 (MIG-200) |
| Rated Duty Cycle (25C °) | 60% |
| Wire Reel Size (KG) | 0 - 5 |
| Welding wire size range | 0.6/0.8/1.0 (mm) |
| Fitted feed roller size | 0.6/0.8 (mm) on MIG-160, 0.8/1.0 (mm) on MIG-200 |
| Wire feed speed | 2 - 14m/min |
| Transistor Technology | IGBT |
| Machine system | DIGI synergic system |
| Welding Process | MIG/MAG/FLUX/LIFT TIG/MMA |
| TIG arc start method | Lift |
| ARC FORCE/HOT START | AUTO |
| Anti-stick | Yes |
| Gas/Gasless | Yes |
| Efficiency | 70% |
| Insulation Class | F |
| Protection Class | IP21S |
| Net Weight (kg) | 8.5 |
| Measurements (mm) | 440x 80x297 |
PACKAGE CONTENT
ANDELI MIG-160 or MIG-200 DC Inverter Welder, 2m 14AK fixed MIG torch for MIG-160 or 3m 15AK Euro Standard MIG Torch for MIG-200, 2m Earth Lead, 2m MMA Lead, Instruction manual, Wire Brush, Welding face mask. Argon gas regulator and Lift TIG torch will only come with the package when you selected it.
