ADC MM702G2 Megabit Modem Router DSL Desktop Series High Performance 1413400 MM702G2-001 1367123 MM702G2-003

New old stock

Lot 14705  PL1056

ADC MM702G2-001 Megabit Modem 702G2 High Performance 2 or 4 Wire Rate Adaptive G.SHDSL Router, North American Power Cord; Versatile performance supports both point-topoint and DSLAM operation; Easy web-based management program using standard web browsers; Built-in SNMP for remote or local management; Serial RS-232 port for direct or dial-up management; 10/100 Base-T Ethernet port with MDI/MDI-X switch next to Ethernet port to connect directly to a PC with a straight-through cable, eliminating the need for cross-over cable

General Information

Manufacturer

ADC

Manufacturer Part Number

MM702G2-001

Product Name

Megabit Modem 702G2 High Performance 2 or 4 Wire Rate Adaptive G.SHDSL Router, UK/Ireland Power Cord

Marketing Information
The G.SHDSL MM702G2 provides an affordable, high performance, 4.6 Mbps connection over copper to support LAN-to-LAN or LAN-to-WAN solutions. The new 4 wire G.SHDSL megabit modem increases reach by up to 30 percent.

The latest addition to ADC’s family of DSL-based customer premise equipment, the MM702G2, is the ideal solution for small to medium-sized businesses and branch offices looking for costeffective Ethernet connectivity. This versatile G.SHDSL-based product can be used back-to-back
for LAN extension applications or as an access modem to connect to DSLAMS.

The MM702G2 supports 2-wire G.SHDSL at speeds up to 2.3 Mbps or 4-wire at speeds up to 4.6 Mbps (1 pair/2 pair copper). Designed to enable Web management and remote downloads, this easy-to-install product combines a WAN interface with complete bridging and routing functionality.

Features
  • Versatile performance supports both point-topoint and DSLAM operation
  • Easy web-based management program using standard web browsers
  • Built-in SNMP for remote or local management
  • Serial RS-232 port for direct or dial-up management
  • Easy-to-use remote code download for software upgrades
  • Standard G.SHDSL EOC messages for loopback and statistics
  • OAM (Operation, Administration and Maintenance) F4 and F5 support for network administration and loopback test
  • Reset button for unit reset
  • 10/100 Base-T Ethernet port with MDI/MDI-X switch next to Ethernet port to connect directly to a PC with a straight-through cable, eliminating the need for cross-over cable
  • Supports 8 simultaneous PPP or Bridge/Routing sessions allowing multiple concurrent connections to the same or different service providers with ATM QoS
  • VLAN support
  • Rate adaptive synchronization using G.SHDSL handshake for highest rate, plus manual override for fixed rate selectable

Specifications
DSL Standards ITU-T G.991.2 G.SHDSL (Annex A and B)
2-Wire G.SHDSL up to 2.3 Mbps
4-Wire G.SHDSL up to 4.6 Mbps
ATM and WAN Standard Protocols ATM Forum UNI Version 3.1 and UNI Version 4.0
Classes of Service: CBR, UBR, VBR-nrt; Virtual Circuits: 8
IEEE 802.1d, RIP V1 (1058), V2 (1723) transparent bridging, up to 1024 MAC address learing,
static routing
OAM F4 and F5 support
PPPoA IETF RFC 2364 PPP over AAL5 (VC multiplexing and LLC encapsulation)
IETF RFC 2684 (1483) Multiprotocol Encapsulation over AAL5, Bridge, Route
PPPoE Client
Internetworking Features (TCP/IP) PPP: 1332, 1661, 1638, 1570
NAPT, NAT1631
DHCP server and client: 2131, 2132
DNS Client / DNS Relay
Dynamic IP routing, ARP: 826, RIP: 1058,1723
TCP/IP: 1112, 1122, 950, 894, 793, 791, 1812
BOOTP: 951, 1542; TFTP: 1350
Inverse ARP 1293
VLAN support, IEEE 802.1q
Security PPP authentication - PAP/CHAP: 1334, 1994
Web and Telnet password
Management Embedded SNMP agent, Terminal, Telnet and Web-based configuration/management tool
Concise MIB: 1212, MIB-II: 1213, Traps: 1215, Bridge MIB: 1493
SNMP MIB: 1471, 1472, 1473, 1474; SNMP: 1157
Software Upgrades BOOTP/TFTP download into built-in flash memory
Remote code download via Web
Physical Specifications Dimensions (HxWxD): 1.97 x 7.25 x 6.45 in. (5.0 x 18.4 x 16.4 cm)
LEDs: Power, LAN (Link, Tx, Rx, Collision); DSL (Sync, Tx, Rx, Margin)
Power Requirements: 100 -120 VAC/220- 240 VAC 50/60 HE, 6VDC, 2.0 Amps
Operating Temperature: 32ºF to 122ºF (0°C to 50°C)
Storage Temperature: -40° to 70°C
Humidity Range: 5% to 95% (non-condensing)
Physical Interfaces LAN Interface 10/100 Base-T/X (IEEE 802.3/u)
Ethernet Port: RJ-45 connector with MDI/MDI-X switch
G.SHDSL WAN Interface Port: RJ-11 connector
Serial port interface for local configuration via RS-232: RJ-45 connector
Certifications FCC Part 15 and 68, Class B for A1 Interface Types, CI SPR 22, Class B, CSA EN60950, IEC60950, UL60950, OE Mark