We accept all kinds of ebay payment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|


--If you dont't know the specific of your vehicle, pls confrim by following the below steps:
1) Check Vehicle Bolt Pattern/ PCD
For 4-lug, 6-lug, 8-lug, measure the segment from the center of a bolt hole to the center of another hole.
5-lug is different, you need to measure the segment from the outermost point (not center point) of a bolt hole to the center of another hole.
Take 5 lug for example, if the length of segment as measured in the picture is 5.5"/ 127mm, and as these are 5 lugs, then the bolt pattern is 5.5"/ 127mm.
2) Check Vehicle Hub Bore Size
Measure the diameter of the center bore, make sure the spacer's diameter is the same as or greater than the axle diameter.
3) Check Vehicle Thread Pitch
There are different types of studs, sunch as M14X1.5, M12X1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
--Measure the fender gap to choose suitable thickness.
Line up a straight edge ruler against the siadewall of the tire, use the measure device to measure from the inside of the ruler to the inner fender lip.
Please take multiple measurements and use the smallest data point (The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer thickness= the smallest gap - 3/8"(10mm)
--Step for Installation Wheel Spacers

Compatible Vehicles:
Infiniti EX35 2008-2012
Infiniti EX37 2013
Infiniti FX35 2003-2012
Infiniti FX37 2013
Infiniti FX45 2003-2008
Infiniti FX50 2009-2013
Infiniti G25 2011-2012
Infiniti G35 2003-2008
Infiniti G37 2008-2013
Infiniti I30 1996-2001
Infiniti I35 2002-2004
Infiniti J30 1993-1997
Infiniti JX35 2013
Infiniti M35 2006-2010
Infiniti M37 2011-2013
Infiniti M45 2003-2004&2006-2010
Infiniti M56 2011-2013
Infiniti Q40 2015
Infiniti Q45 1992-2006
Infiniti Q50 2014-2022
Infiniti Q60 2014-2022
Infiniti Q70 2014-2019
Infiniti Q70L 2015-2019
Infiniti QX50 2014-2017&2019-2022
Infiniti QX55 2022
Infiniti QX60 2014-2020
Infiniti QX70 2015-2020
Nissan 240SX 1995-1998
Nissan 300ZX 1984-1996
Nissan 350Z 2003-2009
Nissan 370Z 2009-2021
Nissan Altima 2002-2022
Nissan Juke 2012-2017
Nissan LEAF ELECTRIC 2011-2022
Nissan Maxima 1989-2012&2016-2022
Nissan Murano 2014-2021
Nissan NV200 2013-2020
Nissan Pathfinder 2013-2020
Nissan Quest 1993-2002&2004-2009&2011-2017
Nissan Rogue 2016-2022
Nissan Rogue Sport 2021
Nissan Sentra 2007-2022
| Item Specifics | |
|---|---|
| Manufacturer Part Number | E115495WAY |
| Brand | EWAY-motor |
| Wheel bolt pattern | 5x4.5/ 5x114.3 |
| Vehicle bolt pattern | 5x4.5/ 5x114.3 |
| Lug Patterns | 5Lugs |
| Package Included | 2pcs |
| Color | Sliver |
| Studs | 12x1.25 |
| Thickness | 1.5" |
| Warranty | 1 Year |
| Stud Grade | 10.9 |
| Inner Diameter | 66.1mm |
| Material | High Quality t6 6061 Billet Aluminum |
| Surface Finish | CNC Machined Polished Aluminum Finish |
| Ship from | Ontario,California |
| Compatibility | Fits Infiniti G37 For Nissan Maxima 350Z |
| Hubcentirc | Yes |
| Package Weight | 7.08lb |
| Superseded Part Number | 1.5 inch Thick Wheel Spacers Adapters M12x1.25 |
| Other Part Number | For Nissan Maxima For Nissan 350Z 370Z For Nissan Altima |
| Interchange Part Number | Fits Infiniti G37 For Infiniti G35 For Infiniti QX70 Q50 |
| Torqued Down By Hand At | 70-80 FT/LB |
We accept all kinds of ebay payment.

Shop Category Delivery Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
(2) 1.5" 5x4.5 Hubcentirc 12x1.25 Wheel Spacers For Nissan 350Z For Infiniti Q60
--If you dont't know the specific of your vehicle, pls confrim by following the below steps:
1) Check Vehicle Bolt Pattern/ PCD
For 4-lug, 6-lug, 8-lug, measure the segment from the center of a bolt hole to the center of another hole.
5-lug is different, you need to measure the segment from the outermost point (not center point) of a bolt hole to the center of another hole.
Take 5 lug for example, if the length of segment as measured in the picture is 5.5"/ 127mm, and as these are 5 lugs, then the bolt pattern is 5.5"/ 127mm.
2) Check Vehicle Hub Bore Size
Measure the diameter of the center bore, make sure the spacer's diameter is the same as or greater than the axle diameter.
3) Check Vehicle Thread Pitch
There are different types of studs, sunch as M14X1.5, M12X1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
--Measure the fender gap to choose suitable thickness.
Line up a straight edge ruler against the siadewall of the tire, use the measure device to measure from the inside of the ruler to the inner fender lip.
Please take multiple measurements and use the smallest data point (The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer thickness= the smallest gap - 3/8"(10mm)
--Step for Installation Wheel Spacers
Compatible Vehicles:
Infiniti EX35 2008-2012
1. Package handling takes about 1 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via DHL,USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 3-7 business days.
3.Local pick up is not available.
4.Orders Will be shipped out from our warehouse in US.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
1,We stand behind every product we sell.
2,All of our brand new items come with a 60-Days money-back guarantee.
3,We define the item as defective only if it doesn't function as described.
4,It is the buyer's responsibility to understand the item description before bidding.
5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
6,We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
7,Shipping & handling cost are not refundable.
8,Man-made damage by abuse or wrong operation is not covered by this warranty.
9,No product liability insurance is assumed.
1.All of our brand new items come with a 30-Days money-back guarantee.
We accept all kinds of ebay payment. 1. We will leave positive feedback once we get your payment.
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.
All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||