Viton® (Fluorocarbon) Fluoroelastomer ─ Brown, 75 Durometer

SIZE: 3/8 (.3750)+/-.016"

COLOR : BROWN

DURO: 75+/-5

SOLD : BY THE FT

Fluorocarbon rubber has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals. Low temperature resistance is normally not favorable and for static applications is limited to approximately –15°F (–26°C) although in certain situations it is suitable down to –40°F (–40°C). Under dynamic conditions, the lowest service temperature is between 5°F and 0°F (–15°C and –18°C). Gas permeability is very low and similar to that of butyl rubber. Special fluorocarbon compounds exhibit an improved resistance to acids, fuels, water and steam.

 

Heat resistance

Up to 400°F (204°C) and higher temperatures with shorter life expectancy.

Cold flexibility

Down to –15°F (–26°C) (some to –40°F (–40°C)).

Chemical resistance

Mineral oil and grease, low swelling in ASTM oil No. 1, and IRM 902 and IRM 903 oils

Non-flammable hydraulic fuels in the group HFD

Silicone oil and grease

Mineral and vegetable oil and grease

Aliphatic hydrocarbons (fuel, butane, propane, natural gas)

Aromatic hydrocarbons (benzene, toluene)

Chlorinated hydrocarbons (trichlorethylene and carbon tetrachloride)

Fuels, also fuels with methanol content

High vacuum

Very good ozone, weather and aging resistance.

Not compatible with:

Glycol based brake fluids

Ammonia gas, amines, alkalis

Superheated steam

Low molecular organic acids (formic and acetic acids).

NOTE: If you need a specific length just putt hat number in the qty box and that will get you the length that you need.

 Example: To order a 5 ft long piece just put 5 in the qty box and this will get you a 5 ft long piece.