eBay

Ratel-X Universal 80x60 HD 4x4 Shackle Mount + 3.25t Shackle & Backing - Single

These Shackle Mounts are made in the United Kingdom. Made from structural steel and comes pre-drilled with 4 fixing holes. You will need to drill four mounting holes in a 80x60mm configuration to fix this to.

Manufactured in the United Kingdom
Zinc Rich Primer and Semi Gloss Black Powder
Universal bracket can mounted to most steel bumpers. Drilling is required.
Fully fillet welded and plug welded from the back for superior strength
Structural S275JR Grade Steel - 12mm Baseplate & 20mm Mounting Lug
Designed to fit 3.25 Ton 5/8" Bow Shackles with 3/4" Pin Diameter (INCLUDED)
Supplied with grade 8.8 BZP mounting hardware, and also a 5mm thick backing plate.
Box Size: 16 x 13 x 9cm & Weight 2.4kg with Shackle & Backing Plate

Note this is for a single bracket, NOT a pair.

Disclaimer. Please read: The effectiveness of this equipment is directly related to the manner in which it is installed, used (for off-road use only), and/or maintained. Proper installation, use and maintenance is solely the responsibility of the installer/user, and will not be assumed by Ratel-X Industries

Please note that all our Ratel-X Industries products are designed for off road use only. The effectiveness of this equipment is directly related to the manner in which it is installed, used, and/or maintained. Proper installation, use and maintenance is solely the responsibility of the installer/user, and will not be assumed by Ratel-X Industries. Ratel-X Industries accepts no liability for loss, damage, injury or death caused by and/or resulting from the use of our parts or products.

A full copy of Ratel-X Industries written warranty and Terms and Conditions is available upon request by contacting us through ebay's message service.