Get on the water FAST! (shipped out within 24 hours of payment & sending us your info - Monday-Friday)
For other fonts please see the other listing in our store
We need THREE pieces of info from you to complete your order.
Please add them by clicking on "Message to seller" on the checkout page.
1. REGISTRATION NUMBER (INCLUDE HYPHENS IF YOU WANT THEM)
2. COLOR - See color chart in photo
3. CUSTOM SIZE IF NEEDED - Maximum 24" long
NOTE: Your order cannot ship until we receive ALL of your info. Your number will be made EXACTLY as it is sent to us. THIS MEANS IF YOU DO NOT INCLUDE HYPHENS WE WILL NOT ADD THEM.
INFO FOR ALL 50 STATES REGISTRATION NUMBER REQUIREMENTS ARE ATTACHED BELOW. WE WILL CREATE REGISTRATION NUMBERS THAT MEET OR EXCEED YOUR STATES REQUIREMENTS. NOTE: ALL STATES REQUIRE MINIMUM 3" TALL LETTERING AND CONTRAST IN COLOR BETWEEN THE HULL COLOR AND THE NUMBER COLOR.
YOU WILL RECEIVE 2 DECALS, one for each side. Easy to install with installation instructions included. Average length is 22" and will vary depending on the letters and numbers required (NOTE: May not fit on some PWC. If you need shorter decals please include the size with your info)
THE MAXIMUM LENGTH OF ANY REGISTRATION NUMBER IS 24 INCHES.
These decals are custom made for you. This is not a package of miscellaneous letters and numbers that you have to stick on one at a time. Your decals will come as one single unit ready for installation.
All decals are produced from marine grade 10 year rated vinyl.
Boats that are registered must display registration numbers on both sides of the bow of the vessel. Numbers are to be displayed in three parts, with a hyphen or space separating each part. Numbers are to be block characters, 3 inches in height or more (excluding borders). Thickness of the characters must be uniform. Slanted characters, scroll and decorative fonts are unacceptable. Registration must have hyphens or spaces between number and lettering groups, as follows:
The validation decal (also known as a registration decal) must be placed within 6 inches and in line with the registration number on either side of the boat.
The law explains that:
“A person may not operate a boat on water of the state unless a valid certificate of number has been awarded by the Department of Administration to the boat and the identification number and any required validation decals are properly displayed on the boat.”
The state law does not outline specific requirements for character height or where the registration number is placed on the vessel. It can be assumed that registration numbers must be displayed on the forward end of the bow on both sides of the vessel. Letter and number groupings of the registration number are to have hyphens or spaces between them.
The AZ registration numbers must be adhered or displayed on both sides of the forward half of the vessel, reading from left right in block letters that are 3 inches or more in height. Numbers must be visible from 100 feet away during the day. The AZ letters must be separated from the numbers by a space or hyphen. An example of numbering is as follows:
Registration decals must be placed in front of the AZ on both sides of the vessel.
“The numbers to be procured and attached shall be at least three inches (3”) in height and of block character, and shall be attached to the forward half of each side of the vessel and clearly visible, pursuant to federal law, and attached in such a manner and position on the boat as may be prescribed by the rules and regulations of the Arkansas State Game and Fish Commission in order that they may be clearly visible.”
Registration numbers marked on the boat must be maintained in a legible condition. Numbers are to be displayed as follows:
Undocumented vessels must have registration numbers painted permanently on or displayed on both sides (using decals or stickers) of the forward half of the vessel. Undocumented vessels are vessels that are registered through the DMV and do not have a marine certificate issued by the U.S. Coast Guard.
Lettering must be legible and visible with plain, vertical, block characters that are 3 inches in height or bigger and must contrast with the color of the background. Numeral and letter groups are to be separated by hyphens or a space of equal width. For example:
Registration stickers issued by the Department of Motor Vehicles must secured to each side of the vessel 3 inches aft (toward the stern) away from and directly in line with the registration numbers.
Letters, numbers or devices that are not in connection with the issued registration number cannot be placed near the displayed registration numbers on the boat.
Vessels that are required to display registration numbers must do so according to the Colorado guidelines.
“The number issued shall be painted on or attached to each side of the bow on the forward half of the vessel or, if there are no such sides, at a corresponding location on both sides of the foredeck of the vessel for which it is issued. The number issued shall read from left to right in block characters of good proportion having a minimum of three inches in height, excluding border or trim, and of a color that contrasts with the color of the background, and so maintained as to be clearly visible and legible (33-13-104).”
Letter and number groupings within registration numbers are to have spaces or hyphens placed between them. For example:
The registration decal (provided for by the state) must be attached to either side of the bow two inches to the left of the the displayed registration number.
Requirements for numbering height and format are not outlined in the Statutes. It can be assumed that registration numbers must be at least three inches in height and in block characters.
Numbers and registration decals must be visible on both sides of the bow of the vessel. Though not explicitly mentioned in the law, it can be assumed that hyphens or spaces of equal width must be placed between the letter and number groupings of the registration number, as follows:
Vessels that are required to display numbers must paint or attach them (with stickers or decals) on the forward half of the bow. The state does not outline the specifics, but it can be assumed that characters must be block letters at least three inches in height that contrast the background color of the boat. It is assumed that a hyphen or space must be placed between the letter and number groupings of the registration number:
Vessels that are required to register and display numbers must paint or attach numbers (using stickers or decals) on each side of the forward half of the vessel in such position as to provide clear legibility for identification, except, if the vessel is an airboat, the numbers may be placed on each side of the rudder. The numbers awarded to the vessel shall read from left to right and shall be in block characters of good proportion not less than 3 inches in height.
Numbers and letters within the registration number are to be separated by a hyphen or space of equal distance:
The decal issued to an undocumented vessel shall be displayed by affixing it to the port side of the vessel within 6 inches before or after the registration number.
As is common among boat registration laws, numbers must be displayed on the forward half of the vessel. The identification number must be comprised of three-inch (no less) in height and one inch apart. It can be assumed that a hyphen or a space is needed between prefix letters and numerals and between the numbers and suffix letters as seen below.
If the vessel’s design would not allow the number to be visible on the forward half of the bow, then the number can be attached to a backing plate, which should be attached to the forward half of the vessel.
Registration decals must be applied to each side of the bow before the prefix letters.
Vessels that are required to register must paint or display (using decals or stickers) registration numbers on each side of the forward half of the vessel, reading from left to right. The numbers and letters must be at least three inches in height and in block characters (slanted or scripted numbers are not acceptable). The color of the number must contrast with the background of the boat. Numeral and letter groups of the registration number must be separated by a hyphen or a space of equal distance.
Registration decals (provided by the state) must be displayed along with registration numbers on the forward half of the bow.
Vessels that are required to paint or display numbers (using decals or stickers) must do so on the forward half of the vessel. The state does not explicitly outline height requirements, but it can be assumed that numbers and letters must be at least three inches in height in block characters, with the color contrasting the background of the boat. Numbers and letters must be separated by a hyphen or space of equal distance, as seen below.
Validation stickers (provided by the state) must be attached to each side of the bow of the ship. The state does not specify proximity to registration numbers, but it is assumed that decals must be within three inches of and in line with the displayed registration number.
Registration numbers adhered to the vessel must be at least 3 inches in height and be read from left to right. “In affixing the number to the boat, a space or a hyphen shall be provided between the IL and the number and another space or hyphen between the number and the letters which follow.”
Required vessels must paint or attach (using decals or stickers) registration numbers in a clearly visible and legible position on the vessel. The state does not specify the exact location, but it can be assumed that registration numbers must be placed on the forward half of the bow. Though not specifically stated in the law, it is assumed (based off of common boat laws) that registration numbers are to be displayed with the number and letter groupings separated by a hyphen or a space of equal distance (one letter space – excluding the letter ‘i’). An example of this can be seen below.
Registration decals (provided for by the state) must be on the forward half of the bow near registration numbers. The state does not explicitly state where decals are to be placed, but it is assumed that they must be placed within three inches of and in line with the registration number.
Registration numbers must be painted or adhered (using decals) on both sides of the forward half of the vessel and read from left to right. The registration number must be in block characters that are 3 inches in height or more. The color of the number must contrast with the color of the background of the boat. Registration numbers must be displayed with a hyphen or a space of equal distance between number and letter groups, as follows:
Vessels that are propelled by sail can have the number placed on each side of the bow or deck on each side of the mast or boom.
The registration emblem (decal) provided by the state needs to be adhered 4 inches from the registration number on either side of the bow. The emblem will be placed 4 inches behind the number on the port side and 4 inches in front of the number on the starboard side of the vessel. Registration certificates must also be kept onboard the vessel.
Registration numbers must be displayed on the forward top half of the boat. Numbers need to be at least three inches in height and be block characters, with the color contrasting with the background color of the boat.
Registration number must have hyphens or spaces (the width of one letter – excluding “i”) between the number and lettering groupings, as such:
Registration decals (provided for by the state) are to be displayed three inches aft of the registration number. Sailboards should have decals attached to the front half of the top of the vessel.
Kentucky requires the displaying of the registration number on both sides of the forward half of the vessel.
Vessels that do not need to be registered include a ship’s lifeboat and vessels that are not motorized. In general, all motorized vessels must be registered through the county clerk’s office.
Numbers can be painted on or attached using decals. They must be block letters that are three inches in height or more and read from left to right. Spaces – equal to the width of a letter besides “I” – must be placed between the letter and number groupings. The color of registration numbers must contrast the color of the background of the boat. An example of the formatting can be seen below.
“The owner shall paint on or attach to each side of the bow of the motorboat or sailboat the certificate of number in such manner as may be prescribed by rules and regulations of the department in order that it may be clearly visible. The number on the motorboat or sailboat shall be maintained in legible condition.”
Though it is not explicitly stated, it can be assumed that registration numbers must be in block letters that are at least 3 inches in height reading from left to right. Registration numbers must contrast the color of the boat and be displayed with a hyphen or a space (the width of a letter – excluding “i”). Here is an example of how it should be written:
Registration numbers are required for all personal watercraft, including vessels smaller than 16 feet in length. Homemade boats must also be inspected and approved by the Department of Wildlife and Fisheries for registration.
In addition to the registration number, a decal will be issued that must be permanently attached to the motorboat or sailboat. This decal must be accessible for inspection at all times when the boat is in operation.
Registration numbers must be painted or attached (using decals) to the forward half of the bow in block characters that are at least three inches in height. The color of the numbers must contrast the background of the boat. Maine registration numbers can be displayed in a two different combinations of number and letter groupings with a space (one letter width – excluding “i”) between each grouping, as seen below. Registration numbers will have the state identification (ME) with either two numbers and three letters or four numbers with one letter.
Registration decals are not mentioned on the Maine IFW website, so it is assumed that such decals are provided for by the state and required to be attached on both sides of the bow near the registration number.
Registration numbers either painted or displayed on the boat using decals must be block letters, three inches in height or more. Numbers must be placed as high above the waterline as possible on both sides of the forward half of the bow. Letters will be separated by hyphens or spaces.
Validation stickers (registration decals) are to be placed in line and within three inches of the displayed registration number.
Required vessels must have numbers painted or displayed using stickers on both sides of the forward half of the bow. Numbers must be block characters three inches in height or more that contrast with the background of the boat. It is assumed that registration numbers must be displayed with the number and letter groupings separated by a hyphen or a space or equal distance, as follows:
Registration decals (provided by the state) must be placed in line with and three inches towards the stern from the displayed registration numbers on the port side of the vessel.
Watercraft that are registered must display registration numbers on the forward half of each side of the bow in block, bold letters that are no less than three inches in height. Numbers must be placed as high above the waterline as possible. The color of the letters must contrast the color of the boat. Number and letter groups are to be separated by hyphens or an equal space, as seen below:
Validation decals are to be placed three inches to the right of the last letter in the registration number. The state provides validation decals upon registering your vessel.
Minnesota requires numbers to be displayed on both sides of the forward half of the bow of motorized watercraft.
Registration numbers must be displayed in block letters that are three inches in height or more. The color of the numbers must contrast with the background of the boat. Number and letter groupings of the registration number must be separated by a space of a letter (excluding ‘i’), as seen below.
Registration decals provided for by the state must be displayed four inches away from the registration numbers towards the stern.
Registration numbers are to be displayed on both sides of the forward half of the vessel in block letters that are three inches in height or larger. Numbers should be divided into three parts, consisting of the symbol MI, followed by a numeric group of no more than 4 numbers, than a group of letters (no more than two). Each group will be separated by a hyphen or a space. An example can be found below.
Registration decals (provided for by the state) are to be displayed within six inches of the registration numbers on both sides of the forward half of the bow.
Boat registration numbers are referred to as “MO” numbers and are to be attached to the forward half of the vessel so that it is clearly visible. Numbers must be in block letters and no less than three inches in height. The MO number must contrast with the background of the vessel.
The number is divided into three parts, comprised of the MO characters, followed by four numbers, then followed by two letters. A two-inch space or hyphen will separate each part of the registration number.
The registration decal (also known as the renewal decal) is to be placed on both sides of the vessel directly underneath the MO number and above the waterline so that it is clearly visible.
Registration numbers (referred to as an identifying number) must be displayed on all sailboats that are 12 feet or longer, motorboats, and personal watercraft.
Required vessels must display registration numbers on each side of the forward half of the bow in block letters that are at least three inches in height. Colors of the letters must contrast with the color of the boat. Numbers are to be displayed with hyphens or spaces separating the letter/number groups (as seen below).
Boat validation decals (provided for by the state) are to displayed on each side of the bow towards the aft. Along with validation decals, a permanent registration decal must be displayed on the port side bow behind the boat’s number.
Vessels that are required to display numbers must do so on both sides of the forward half of the bow. The registration numbers are to be placed after the validation sticker. They must be in block characters that are no less than three inches in height in a contrasting color to the boat. Numbers must be visible up to 100 feet away. Number and letter groupings in the registration number must be separated by a hyphen or a space of equal width.
An example of what the registration number would look like is:
The state provides the validation sticker for the boat once registered.
Registration numbers are to be displayed on both sides of the forward half of the bow of the motorboat in block characters that are three inches in height or more. The color of the numbering must contrast with the color of the boat as to make it easily visible. It is assumed that registration numbers are to be displayed with hyphens or spaces (the width of one letter – excluding ‘i’) between letter and number groupings, as follows:
Vessels that are required to register must paint, display, or attach registration numbers (also known as a bow number) to each side of the forward half of the vessel. The numbers must be block letters that are three inches in height that contrast in color from the background of the boat. Number and letter groupings must be separated by either a hyphen or a space (the width of a letter – excluding ‘i’). For example:
A registration decal (provided for by the state) must be displayed along with the registration number on the forward half of the bow.
Numbers must be displayed on each side of the bow using letters and numbers that are no less than three inches in height. The color of registration number must contrast from the color of the boat as to make the number clearly visible. Number and letter groupings within the registration number must be separated by a hyphen or space (an example can be seen below).
Registration decals (provided for by the state) are required to be displayed on both sides of the bow along with assigned registration numbers.
Vessels that are required to be registered must have painted on or displayed registration numbers (also known as boat numbers) on both sides of the forward half of the bow in three inch block letters. The numbers must contrast with the color of the background of the boat. Registration numbers must have hyphens between the number and letter groupings.
Registration numbers should be displayed as such:
Registration validation decals (provided for by the state) are required to be displayed along side registration numbers. The decal must only be displayed on six inches to the right of the number on the port side of the vessel.
Vessels that are required to display registration numbers must either paint or attach (using decals) on both sides of the forward half of the vessel. Registration numbers must in a block characters that are no less than three inches in height. The color of the letters must contrast with the color of the boat. Registration numbers are to be displayed with hyphens or spaces (the width of a letter – excluding the letter ‘i’), as follows:
Registration stickers (provided for by the state) are to be placed 18 inches from the bow on both sides of the boat.
Registration numbers must be painted or permanently affixed (using decals or stickers) to both sides of the forward half of the bow in block letters that are at least three inches in height. Characters must be in a solid color that contrasts with the background of the vessel. The numbers must read from left to right as it appears on the registration card. Letters are separated from numerals by hyphens or an equivalent space.
Displayed numbers would look like the following example:
The state will provide registration decals for displaying on both the port and starboard side of the vessel. These decals must be within six inches of the displayed registration number.
Registration numbers are to be displayed on required vessels on both sides of the forward half of the vessel so that they are clearly visible. The law does not specify height requirements, but it can be assumed that displayed registration numbers must be block letters at least three inches in height that contrast with the color of the boat.
We also assume that numbers should be displayed on the vessel like the following example:
Registration decals (also known as identification licenses) are provided for by the state and must be displayed along with the registration number, The state does not outline the specific placement requirements for these decals, but it is assumed that they should be in line with and no more than six inches away from the registration number towards the aft of the vessel.
Canoes, rowboats and inflatable watercraft must display the 3”x6” decal on the port and starboard bow (provided for by the state instead of registration numbers).
Vessels that require registration numbers must display them on both sides of the forward half of the bow in block letters that are no less than three inches in height. The characters must contrast with the color of the background of the boat; they must also be in a single, solid color. A hyphen or equivalent space must be placed between the letters and numerals in this manner:
Registration decals (referred to as registration tags) are issued by the state when you register your vessel. These decals must be placed on either side of the vessel six inches away from the registration number and towards the stern.
Vessels that do require registration numbers must have them painted or attached to the forward half of the vessel in block letters that are no less than three inches in height. The color must contrast the color of the boat. It is assumed that number and letter groupings must be separated by a space or a hyphen, as follows:
Registration decals provided for by the state must be attached to both sides of the forward half of the bow in line with the registration number.
Vessels that are required to paint or display numbers must do so in block characters that are no less than three inches in height to allow for clear identification. Numbers will read from left to right and contrast in color from the background of the boat. Number and letter groups must be separated by a space of at least 2 inches (an example can be seen below).
Registration decals (also referred to as validation stickers) must be displayed three inches away from the registration number towards the stern. The state issues these decals for display.
Registration numbers must be displayed on required vessels on both sides of the forward half of the bow in solid vertical block characters. Numerals and letters are to be separated by hyphens or an equivalent space. Registration numbers are displayed like the following examples:
A registration decal (referred to as the validation decal) must be displayed within six inches of the painted or attached registration number. The state will provide these decals to adhere to your vessel.
Motorized watercraft that are required to display numbers must do so on the forward half of the bow. Specific requirements are not mentioned in the law, but it can be assumed that numbers must be in block characters that are no less than three inches in height. They must be a single, solid color that contrasts with the background of the boat. It is also assumed that number and letter groups must be separated by a space or a hyphen, as follows:
Vessels that are required to display numbers must do so on the forward half of the vessel. The law does not outline the specific height requirements, but it can be assumed that they must be at least three inches in height in block characters of a solid color, contrasting from the color of the boat. It is also assumed that registration numbers must have hyphens or spaces placed between the letter and number groups, as follows:
The state will provide registration decals that are to be attached on each side of the bow within six inches of the displayed registration number.
Required vessels must display registration numbers on both sides of the forward half of the bow in characters that are no less than three inches in height. Numbers must be in block characters and a solid color that contrasts the background color of the boat. Numbers are to be read from left to right, with a space between the letter and number groupings.
Along with the registration number, a registration decal (also known as a validation decal) is to be displayed on the bow of the ship, next to and in line with the numbers. The validation decal is only provided for by the state and can not be created by the owner.
Vessels that are required to paint or display (using stickers or decals) registration numbers must do so on the forward half of the bow in block letters that are no less than three inches in height. The color of the registration number must contrast the color of the boat. Numbers and letters within the registration number are to be separated by a hyphen or an equal space.
Registration decals are not mentioned in the law, but it is assumed that they are provided for by the state. Such decals must be adhered to the forward half of the bow and in line with displayed registration numbers.
Vessels that are required to display numbering (known as the TX Number) shall do so on the forward half of the bow in block characters that are no less than three inches in height. Numbers must contrast the color of the boat. Numerals are separated from letters by hyphens or an equivalent space. Examples of displayed numbers can be seen below.
Validation decals (provided for by the state) are to be displayed within three inches towards the rear of the boat away from the registration number.
Registration numbers must be painted on or attached (using decals or stickers) to the forward half of the vessels on the bow in block characters that are no less than three inches in height. The color of the registration number must contrast with the background of the boat. Numeral and lettering groups are to be separated by a hyphen or equal space, as follows:
Vessels that do require registration must display registration number on both sides of the forward half of the bow in block characters that are no less than three inches in height. The color of the character values must contrast with the background of the boat. Though not mentioned in law, it is assumed that number and letter groupings must be separated by a hyphen or equal space.
A validation sticker must be attached to the forward half of the vessel near the displayed registration numbers.
Generally, if the vessel is powered by any type of motor it must be registered. Vessels that are registered must paint or attach (using stickers or decals) registration numbers on the forward half of the bow in block characters that are no less than three inches in height. The color of the characters must contrast the color of the boat. It is assumed that registration numbers must include hyphens or spaces between the letter and number groupings, like such:
Registration decals must be displayed within six inches of the attached or painted registration numbers.
Vessels that are required to register must paint or attach (using decals or stickers) registration numbers (also known as the WN number) on the forward half of the bow in block characters of a solid color that contrasts the color of the boat. The characters must be no less than three inches in height. A hyphen or equivalent space must be placed between numeral and letter groupings. For example:
Registration decals are to be placed within six inches of and in line with the registration number towards the stern. Decals must be placed on both sides of the bow.
Required vessels must paint or display (using stickers or decals) a registration number on both sides of the forward half of the bow in block characters that are no less than three inches in height. The color of the characters must contrast with the background of the boat. The vessel registration number will consist of three parts, with each part separated by a space equal to the width of a letter (excluding ‘i’). An example of how the number is displayed can be seen below.
The registration number is to be accompanied by a registration decal (provided for by the state). The decal must be placed in line with and within six inches of the number.
Vessels that are required to register must display numbers on the forward half of the bow in block characters that are no less than three inches in height. These characters must not be in a decorative fonts or colors that cannot be easily seen against the background of the boat. The numeral and letter groupings of the registration number are to be separated by a space of two inches. An example of the displayed number is below:
Registration decals (provided for by the state) must be displayed in line with the registration number on both sides of the bow, towards the stern.
Vessels that are required to paint or display (using stickers or decals) registration numbers must do so on the forward half of the bow of the ship in plain, block, vertical letters that are no less than three inches in height. Numbers and numerals are to be separated with a hyphen or a space of equal width, as follows:
Registration decals (provided for by the state) must be displayed on both sides of the bow of the ship and in line with the registration number.