Image result for fg ute fpv        Image result for walbro performance fuel pumps    Image result for walbro performance fuel pumps

UP FOR SALE IS OUR SNIPER-PERFORMANCE & WALBRO CUSTOM BUILT FUEL PUMP ASSEMBLY TO SUIT FALCON UTE (BF UTE BUILT AFTER 09-2007) AND ALL FG & FGX UTE'S.

 WALBRO 460-LPH TIA485-2 750+BHP SUITED FOR E85, METHANOL & PUMP FUEL (PERTOL) WITH THIS PUMP.  

THIS ASSEMBLY IS CUSTOM MADE BY SNIPER PERFORMANCE AND FITTED WITH A GENUINE WALBRO 460-LPH TIA485-2 AND CAN SUPPORT UP TO 750BHP.

GENUINE WALBRO MADE IN THE USA.

OUR ASSEMBLY IS CUSTOM MADE THE A SPECIAL SWIRL-POD TO STOP SURGING UNDER EXTREME TAKE OFFS AND AROUND CORNERS WHICH IS A COMMON PROBLEM WITH THE FACTORY SWIRL POD AND STOPS THE SURGING PROBLEM BY 100%.  

IT HAS BEEN DYNO & RACE TRACK TESTED. 1/4 MILE, CIRCUIT AND DRIFT.

THIS ASSEMBLY CONSIST OF ONLY THE BEST OF THE BEST PARTS AVAILABLE AND HAND ASSEMBLED IN MELBOURNE. THE ASSEMBLY IS MADE OF THE BEST POLLIMER AVALABLE AND ITS E85 & METHANOL APPROVED. 

WE ARE THE ONLY ONES THAT OFFER THIS HIGH FLOW ASSEMBLY FOR THE FORD BF, FG & FGX UTE. 

THE FUEL HOSES USED IN THIS ASSEMBLY ARE MADE IN THE EU THE WHITE HOSE IS RATED AT TWICE THE BURST PRESSURE OF THE FACTORY HOSE AND IS A HIGH FLOW. THE BLACK FEED HOSE IS A LINED HOSE MADE IN GERMANY THAT HAS A 3X BURST PRESSURE OF THE STANDARD HOSE.

PUMP FITTED WITH THE DELPHI FACTORY WIRING PLUG (NO JOINS) WITH STAINLESS STEEL TERMINALS.

SPECIALLY MADE STAINLESS STEEL COMPRESSION SPRING & GUIDE PINS FOR NO CHANCE OF CORROSION.

HIGH MICRON HIGH FLOW NYLONG STRAINER.

HIGH FLOW MODIFIED FUEL RETURN VALVE TO KEEP THE RETURN PRESSURE LOW AND TO FILL THE SWIRL POD IN HALF THE NORMAL TIME IT WOULD USALY TAKE. 



Will suit ALL the following vehicles:

Make

Model

Series

Engine

Date

Ford

Ford

Falcon

Falcon 

BF UTE

XT UTE

4.0L I6

4.0L I6

BUILT AFTER 9/2007  


Ford

Falcon FG UTE

G6 & G6E

4.0L I6

2008-current

Ford

Falcon FG UTE

XR6

4.0L I6

2008-current

Ford

Falcon FG UTE

XR6 Turbo, G6E Turbo

4.0L I6 Turbo

2008-current

Ford

Falcon FG UTE

XR8

5.4L V8

2008-current



SPECIFICATIONS. TIA485-2 460LPH
FUEL PUMP PART NUMBER: WALBRO 460-LPH TIA485-2.
PRESSURE AND FLOW RATE: 460-LPH AT 3-BAR 43.3-PSI 12.5-V supports up to 750-BHP.
ASSEMBLY PART NUMBER: SNIPER PERFORMANCE MOD-043-3-460.
ASSEMBLY HEIGHT: Bace to flange 405-mm compressed 355-mm.
ASSEMBLY CAPACITY: POD 1-litre.
ASSEMBLY HOSE FITTINGS: Left Returnee (8-mm c-lock). Centre blocked. Right (10-mm c-lock) Fuel out.
WIARING HARNEST: One piece wiring loom Delphi to Walbro with stainless steel braid & terminals .
PRESSURE HOSES: High pressure, high burst, high flow white & black submersible fuel hose made in the EU, 155mm long. 
FUEL GAUGE READINGS. Full up 50-ohms. Empty down 990-ohms.

The Walbro TIA485-2 460LPH pump is the highest flowing in-tank fuel pump on the market, and is E85 & Methanol safe.  Walbro designed the pump to meet the  requirements of modern turbocharged applications where a single 255LPH fuel pump is insufficient.   Walbro’s turbine pump head uses two sets of turbine blades set in parallel on a common shaft (like a jet engine). This high efficiency pump design pressurizes the fuel as it flows through the pump axially without forcing the fluid to change direction – the end result is tremendous flow rates at a variety of different rail pressures and to suit various injector sizes. The turbine design lends itself to extremely quiet operation and a massive flow rate.




WE CAN ALSO SUPPLY THIS ASSEMBLY WITH THE WALBRO F90000274 700-BHP 400LPH PUMP FUEL & THE WALBRO TIA485-2 750+BHP 460LPH E85 PUMP. MESSAGE US FOR A PRICE $$$. ALL CUSTOM APPLICATIONS WILLING WELCOME TO BUILD.
Image result for F90000274Image result for walbro performance fuel pumps Image result for walbro GSS341Image result for walbro GSS341
COMES FULLY ASSEMBELD WITH ALL E85 APROUVED PARTS FITTED READY TO DROP IN.

The Walbro GSS341 255LPH high flow in-tank fuel pump is the most common market because its the best pump for its size. Walbro designed the pump to meet the  requirements of modern turbocharged applications. The turbine design lends itself to extremely quiet operation and a massive flow rate.

The Walbro F90000262 400LPH pump is one of the highest flowing in-tank fuel pump on the market. Made for pump fuel (petrol).  Walbro designed the pump to meet the  requirements of modern turbocharged applications where a single 255LPH fuel pump is insufficient. Walbro’s turbine pump head uses two sets of turbine blades set in parallel on a common shaft (like a jet engine). This high efficiency pump design pressurizes the fuel as it flows through the pump axially without forcing the fluid to change direction – the end result is tremendous flow rates at a variety of different rail pressures and to suit various injector sizes. The turbine design lends itself to extremely quiet operation and a massive flow rate.

We also sell performance and standard fuel pumps, Injectors VDO & Bosch 280cc to 2400cc, Sniper Performance Coils, Garret Turbo, Turbosmart Full Range, Vic agent for AeroFlow fittings & hoses, Crow Cams, APR bolts, K&N Air Filters, NOS Kits & Filling, Auto Meter,  Intercoolers, Custom Piping, Center Line & Weld Racing Wheels, Mickie Thompson Race Tyres, Red Line Oils and many more.

Message us with your details and we will get back to you ASAP.

WE ALSO HAVE IN OUR STORE FOR SALE IS OUR NEW PRODUCT.

 YEARS IN DEVELOPMENT AND WITH EXTENSIVE VEHICLE AND DYNO TESTING, MADE IN JAPAN WITH AIRCRAFT GRADE ELECTRONICS. AND SUPPLIED WITH VDO SILICON GREASE.

SET OF 6 PERFORMANCE IGNITION COILS TO SUIT FALCON XR6 TURBO FG FGX & TERRITORY TURBO MODELS. WE ARE SO CONFIDENT OF THIS PRODUCT  IF YOU ARE NOT 100% SATISFIED WE OFFER A FULL MONEY BACK GUARANTY.


Our coils connect directly to the factory connectors. Once installed, you’ll have the power and performance of a higher energy spark with 15% more spark and multiple spark discharge. 

Increased spark KV'S and voltage along with multiple spark capabilities, the time it takes to fire once it gets the signal is one Millisecond which is five times quicker than standard. That helps improve the combustion process of the fuel mix­ture to create an efficient burn. 

Perfect spark from 500 rpm to 12,000 rpm This results in improved throttle response. 

Stops Pre-Ignition and Pinning when used

with E85 applications. 

Smooth idle and quick starts, plus increased hard acceleration and high rpm without misfiring.


SNIPER HI PERFORMANCE! 

MISFIRING PROBLEMS 

SOLVED EASY!!! 


Made in Japan with a 2 year

Warranty $210.00 a set of 6.

For General Enquires :Customer Support , technical support and bookings. For Pickups we are located and share the premises with Prestige Auto Venue we are Auto Wholesale Australia,

45 Charles street north Coburg
Melbourne Victoria 3058. Always best to call first.

Contact through EBay message leave us enquiry ore your details and we will get back to you ASAP. we can no longer list our phone number on listings.

Warranty. 12 Months or 20,000 km Warranty on Passenger  Vehicles. 

Payment.   We accept : Pay on Pickup, PayPal, Bank Transaction, credit card over the phone from 9 to 5 Monday to Friday & Money Order as payment methods. Please use your EBay Username as a transaction reference.

Postage. Local Pickup (message for address and pick up times). Domestic :  Fixed Rate we use Couriers please, Fastway couriers, Australia Post (Regular Post) and express. International : POA , Please contact us via EBay for a quote. All items sent with tracking no and insurance.

Fitting services.   Available in our modern and well equipt work shop.

Opening Hours. Monday to Friday 7.30am to 6pm. Saturday by appointment only.

For General Enquires :Customer Support , technical support and bookings. For Pickups we are located and share the premises with Prestige Auto Venue we are Auto Wholesale Australia,

45 Charles street north Coburg
Melbourne Victoria 3058. Always best to call first.

Contact through EBay message leave us enquiry ore your details and we will get back to you ASAP. we can no longer list our phone number on listings. 04., 17., 303., 775.