May you Like
50A PLASMA CUTTER/200A HF TIG/MMA 3 IN 1 DC INVERTER WELDER
DESCRIPTION
This is a digital Plasma Cutter/TIG/MMA multiprocess quality machine which comes with almost complete accessories so it is a perfect equipment for garage, farm, mobile technicians, DIY and other repair services. 50amp powerful plasma cutter mode can cut all conductive metals such as aluminium, stainless steel, copper, brass, titanium and so on. 200amp powerful DC TIG welding mode can be suitable for welding the metals such as steel, stainless steel, nickel alloys, copper, brass, bronze and so on except aluminium and aluminium alloys. 200amp powerful MMA/ARC/STICK welding mode can be suitable for electrode size 1.6-4.0mm.
FEATURES
- PLASMA CUT & TIG & MMA/ARC/STICK DC Inverter welder 3 IN 1
- Digital Control Panel Design enables more accurate and easier operating
- IGBT technology inverter- Latest transistor technology more efficient so enable highest power and a duty cycle of 60% at full power. No transformer, no MOSFET, modern IGBT
- Smooth arc and stable welding performance
- Plasma cutter function for cutting all conductive metals such as aluminium, stainless steel, copper, brass, titanium and so on
- DC TIG function for welding stainless steel, carbon steel, copper and non-ferrous metals but not suitable for welding aluminium and aluminium alloys
- MMA / Stick electrode welding– is a universal welding process. No protective gas is needed and can therefore be used flexibly anywhere.
- HF (high-frequency) touched Arc-starting (contact ignition) enables easier starting of cut
- Cutting thickness: Clean cut is up to 12mm, Severance cut is up to 16mm on mild steel
- TIG welding with HF (high-frequency) ARC Start - Easy ARC starting by non-contact ignition, improves tungsten life and ensures a much better welding result
- UP-Slope and DOWN-Slope can be adjusted in range 0-5S on TIG Welding then prevents voids to improve the welding quality at the start and end of the welding.
- 2T, 4T MODES are available (determines the control of the operating mode and provides extended control over the current flow. In 2T mode, high-frequency ignition (HF) remains active until the button on the torch is released. In 4T mode the arc is ignited after a single press and release of the button. After pressing and releasing again, the ignition is stopped.)
- Comes with a 4m CUT torch and a 3m TIG torch
- Auto hot-start, ARC Force and Anti-stick technology in MMA welding
- Usable electrode 1.6 - 4.0mm for MMA welding
- LED digital displays
- CE approved
- Compact portable design and light weight
- Wired with a 16 amp industrial plug
SPECIFICATION
| MODE | CUT | TIG | MMA |
| Power Input Voltage (V) | AC220V+/-15% Single phase | ||
| Frequency(Hz) | 50/60 | ||
| Power Factor | 0.93 | ||
| Input Capacity (KVA) | 7 | 5 | 7 |
| No-load Voltage (V) | 210 | 64 | 64 |
| Current Range (A) | 20-50 | 5-200 | 20-200 |
| Rated Output Voltage(V) | 100 | 18 | 27.2 |
| Rated Duty Cycle (%) | 40% | ||
| No-load Loss(W) | 100 | ||
| 4T / 2T Mode | Yes | Yes | / |
| ARC Start Method | HF Contact | HF | Scratch |
| Post Flow(Gas delay) Time (S) | 0-10 | 0-10 | / |
| Up Slope Time (S) | / | 0-5 | / |
| Down Slope Time (S) | / | 0-5 | / |
| Auto ARC Force | / | / | Yes |
| Auto Hot Start | / | / | Yes |
| Anti-stick | / | / | Yes |
| Welding Electrode Size | / | / | 1.6-4.0mm |
| Efficiency (%) | 70% | ||
| Insulation Class | F | ||
| Protection Class | IP21 | ||
| Weight (kg) | 14 | ||
| Measurements (mm) | 456 x 177 x 354 |
PACKAGE CONTENT
ANDELI CT-520D PLASMA CUTTER/TIG/MMA 3 IN 1 MACHINE, 4m Cutting Torch, 3m TIG torch, 2m MMA lead, 2m Earth Lead, Instruction manual, Air filter regulator and Torch Consumables Kit etc.
