PROJECT MU HC800 FRONT PADS

Part # Z318 HC+800

Compound Hyper Carbon
Rotor Temp 0～800℃
Friction

0.38～0.62μ

THESE PADS ARE TO SUIT THE AUDI

A4 AVANT（Wagon）

 

2.0 DTM Limited 8EBWEF                          

 

2.0 TFSI Quattro 8EBGBF 8EBWEF

 

3.2 FSI Quattro 8EAUKF

 

A6 AVANT（Wagon）

 

2.8 FSI Quattro 4FBDXS 4FCCES 4FCCEA

 

3.0 TFSI Quattro 4FCAJS 4FCAJA

 

3.2 FSI Quattro 4FAUKS 4FBATS 4FBATA 4FBVJA

 

A6 Allroad Quattro

 

4FAUKA 4FBVJA

 

A8 3.2 FSI Quattro

 

4EBPKF

 

 

THE PHOTO IS OF THE ACTUAL PADS, PLEASE CONFIRM PAD SHAPE.

HC800 is a premium Performance Street, Race and Rally brake pad. HC800 has more bite than both NS and B-Spec and has excellent fade resistance. Capable of operating at temperatures up to 800°c, this pad will handle almost all serious braking conditions.
HC800 is a genuine ‘cross over’ pad suitable for both road and race. HC800 is extremely capable in competition environments so use this pad if you are involved in serious track day, rally etc.
Along with temperature capabilities, HC800 is renowned as a ‘drivers pad’ with unmatched driver feel and control.

HC800 BRAKES FEATURE

Fade Resistance

When brake pads operate at high temperatures, high pressure gases can be created in the pad and can cause a 'gas layer' between the pad and rotor. This can make the driver feel like the brakes have lost performance as the brake pedal feels the same, but the car won't slow down as normal. This phenomenon is known as 'fade'. A slot is manufactured in all Project-Mu pads to offer the gases an escape route.
※ Rotor slots also assist to provide the same solution.

Heat Treatment

Project-Mu brake pads are subjected to heat treatment as part of the manufacturing process. This process 'burns out' unwanted materials in advance, reducing the gases that can cause fade. As a result, Project-Mu brake pads only need light 'bedding in' to match the pad to your rotor surface.

Brake Pad Structural Stability

Brake pads are subjected to huge pressure from caliper pistons in unequal proportions across the pad. Brake pads must remain flat to offer optimal performance so Project-Mu use only the highest grade quality steel at the correct thickness to ensure this stability. Project-Mu pads are up to 20% stronger than some competitors.

SLEEKA SPARES IS AN OFFICIAL PMU DISTRIBUTOR PLEASE CONTACT US FOR ALL OF YOUR BRAKING NEEDS.

**SLEEKA SPARES**

 2/1391 MAIN NORTH ROAD

PARA HILLS WEST

SOUTH AUSTRALIA

If you have any questions please email us

DON'T FORGET TO CHECK OUT OUR OTHER AUCTIONS!

All winning bidders must make contact within 3 days and payment within 7 days.
"LIKE" US ON FACEBOOK