Vantec Quad Chip 4-Port Dedicated 5Gbps USB 3.0 PCIe Host Card

The Vantec Quad Chip 4-Port Dedicated USB 3.0 PCIe Host Card is design to offer the best USB 3.0 performance possible. This unique design with 4 dedicated chips provides 4 dedicated fast lanes with the maximum bandwidth. Using 5Gbps per chip and with a combine total of 20Gbps, this translates in to superfast file transfer and work done. This Quad chip Host card incorporate UASP technology with the aid of the latest OS and UASP devices will further enhances and put the speed into hyper drive. This card comes with lots of additional features, like support for USB Battery Charging specification, Intel XHCI Compliant, PCIe 2.0 x4 interface, built in power connection for LP4/SATA and backward compatibility to all your other slower USB devices. This card simply will increase your productivity by many times.

Provides 4 dedicated USB 3.0 chip for work that requires super-fast data transfer

Support UASP Devices on all 4 ports for extra boost in speed

Included Standard and Low Profile bracket for easy installation into small form factor system

Support PCI Express x4 slot interface with wider lanes for speed and large amount of data

Support PCI-Express 2.0 specifications using x4 Connection for faster and wider lanes for speed

SuperSpeed USB 3.0 Connection to give you the Maximum File transfer or Backup

More Features

Support 5Gbps per chip, with 4 chip to get a total bandwidth of up to 20Gbps
Support USB Battery Charging Specification Revision 1.2 for quick smart charge.
Compliant with Intel’s eXtensible Host Controller Interface (xHCI) Specification Revision 1.0 for compatibility to market standard.
Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices for backward compatibility with both old and new devices
Supports 4 downstream ports with flexibility for all speeds from 1.5Mbps to 5Gbps so that fast and slow devices can co-exist together without slowing each other down.
Conveniently built-in LP4 and SATA power connector for receiving extra power from system power supply.
Hot-swapping feature allows you to connect/disconnect devices without powering down the system
Support Windows XP,7,8,8.1, Server 2012, 2008 R2, 2003, and Linux Kernel 2.6.31 or later

Specifications:

Model: UGT-PCE430-4C

Device Support: USB 3.0 Type A (backward compatible with USB 2.0 and 1.1)
Ports: 4, USB 3.0 Type A ports
Bus Type: PCI-Express x4
Power Connector: 1 - LP4 (4 pin Molex) or SATA power connector
Dimension: 168 x 69 x 20mm

System Requirements:
PCI-Express x4, x8 or x16 slots
Microsoft Windows XP,7,8,8.1,10, Server 2012, 2008 R2, 2003, and Linux Kernel 2.6.31 or later
USB 3.0 devices preferred to get maximum speed

What's included:
Quad Chip 4-Port Dedicated 5Gbps USB 3.0 PCIe Host Card
Low Profile Bracket
Driver CD
Quick Installation Guide