US CARBURETION CLASSIC TRI-FUEL ADAPTER



Please note: The revolutionary design of our newly patented Motor Snorkel (05/2013) has rendered these products inferior. The MotorSnorkel eliminates cutting the frame, adding stud extenders to the carburetor, cutting and extending the crankcase line, etc.   Because of these reasons most customers no longer want this type of propane and natural gas conversion kit, system or component.   As a result, no returns are offered for this item.

ITEM:  Briggs Generac GN410 Engine Type Tri-Fuel Propane Natural Gas and Gasoline Kit for Generac GN410 Briggs Type Engines
ITEM NUMBER:  K9003
SPECIFICATIONS:  See pictures for measurements and see listing below for engines and equipment Most used on the Briggs Generac GN410 engines.
QUANTITY:  1 

 
The picture is a representation of the kit. Parts will vary according to engine type.  This kit has all the basic parts necessary to convert your generator to a tri-fuel generator (propane, natural-gas, gasoline) additional fuel lines and connection fittings, hoses, etc. will be necessary to connect this basic kit to your desired fuel source.   We do maintain a complete list of generators and engines on our Motor Snorkel or USCARB generator conversion kit websites.  IF YOU ARE UNSURE, IT MAY BE BEST TO PURCHASE A GENERATOR SPECIFIC KIT FROM USCARB.   We have a 20 year record of outstanding customer service. 

This Tri-fuel conversion kit will take your gas powered Briggs Generac GN410 generator to the next level.  The kit is designed to work with the Briggs Generac GN410 carburetors.    See list below. 

The center to center is apx. 1-7/8" and the studs are horizontal at the 3 o'clock and 9 o'clock positions.

The included instructions and supplies will allow you to modify your current ENGINE or GENERATOR to use propane, natural gas or gasoline.  Given the tendency of gasoline to go bad or gum up the generator, having this option gives you great versatility.   First, it can be used on the Briggs engine it was designed for and on natural gas and propane. Of course, the gasoline option still is functional, however some carburetors will have a gasoline bowl vent that will be covered by the adapter which will not allow the engine to run properly on gasoline without first removing the adapter.  (This is just another reason why the Motor Snorkel system is superior since it never has to be removed.)  

We do not recommend or condone any alterations or misuse of our systems due ot safety issues.  However, many people have used this adapter experimenting with different fuels like hydrogen, methane and biogas.  (View USCarburetion Videos on YouTube)  The engine regulator in the kit can handle from 4”  to 14” water column inlet pressure. 

Please follow the detailed instructions included with the conversion kit so this should not be an issue.

Please see our other listings for the 12' Propane Cylinder Hose Connection kit to run your generator off of #20 cylinders or up to 100# cylinders...NPSK-12 Accessory Kit

Other than the lower 48 states, buyer will pay the actual current shipping costs.



K9003 Kit Can fit the following:

Briggs


EXL8000 Generac 52331


1006-0 Generac GN360


1006-1 Generac GN360


1013-0 Generac GN410


1017-0 Generac GN410


1019-0 Generac  GN410


1019-1 Generac GN410/GH410


1019-3 Generac GN410/GH410


1021-0 Generac GN360


1277-0 Generac GN410


1315-0 Generac GN410


30244


 


Generac


XG7000 Generac OJ2515


XP8000 Generac GN410


MC8000 Generac GN410


GN410


7000EXL Generac 1470


7500w Generac GN410


7550EXL Briggs 00935-3 1470-1


7550EXL Generac GN410


EXL8000 Generac 52331


8000XL Generac GN410


GG10020 Gentron 5747


GP8000 Generac 5696