Neoprene Solid Rubber Sheet - High Quality Low Price by HOBBYPRO ®

Specifications:

* This commercial neoprene rubber sheet is suitable for a wide variety of engineering uses where oils, greases, ozone and water are involved 

* It is commonly used for gasket making, non-slip applications and other general purpose DIY. (It is the customer’s responsibility to ensure suitability and safety of use)

* Available in convenient strips, squares and rectangles in a variety of sizes and thicknesses.  (The image within this listing is of the actual rubber - © PVC Tube Online Ltd)

* Please note this is NOT wet-suit material.  Neoprene is the name for this type of synthetic rubber

* Please note that all the neoprene is cut to size by us, every effort is made to ensure the nominal dimensions are as accurate as is practical. Please note the commercial tolerance on the length and width is +/- 1% (thickness tolerance is below).  Quoted thickness is the average across the entire sheet and standard tolerances apply.  The size may be slightly larger than the size stated in the listing. 

 * Sample size is approximately 1cm by 2cm

Guidelines for use (It is the customers responsibility to ensure suitability of use):

General Purpose - Good

Abrasion Resistance - Moderate

Ozone Weather Resistance - Moderate

Flame Retardency - Moderate

Electrical Resistance - Not Suitable

Food Use Suitability - Not Suitable

Fuel Contact Use Suitability - Not Suitable for Petrol, Diesel etc

Properties for use:

Colour - Black

Specification - Commercial

Base Polymer Type - SBR/CR

Indentation Hardness - 65 Shore A -4 +5 Degrees

Specific Gravity - 1.5 +/- 0.05 g/cm3

Tensile Strength (Min) - 3 Mpa

Theoretical Elongation @ Break (Min) - 100%

Minimum Continuous Working Temperature - -20c

Maximum Continuous Working Temperature – 65c

Maximum Intermittent Working Temperature – 70c

Compression Set 70 Degrees 22 Hours - 35% Max

Please note the commercial on thickness tolerance exceeds BS3734 1978 as follows:- 1mm = +/-0.2mm  -  1.5mm = +/-0.25mm  -  2mm = +/-0.3mm - 3mm = +/-0.35mm  -  4mm = +/-0.4mm  -  5mm = +/-0.45mm  -  5.5mm = +/-0.45mm  -  6mm = +/-0.5mm  -  6.5mm = +/-0.5mm  -  7mm = +/-0.5mm

The HobbyPro® Guarantee: Every effort is made to supply quality products at a realistic price and to deliver them to you in appropriate packaging – to ensure your goods arrive in the best possible condition.

Technical Differences from other rubber sheet that we supply within our eBay shop:

This rubber sheet has a shore hardness of 65 Shore A -4 +5.